EV Connector Testing Equipment AC/DC Anti-Shock Probe Experiment Device
EV Connector Testing Equipment AC/DC Anti-Shock Probe Experiment Device
Complied Standards & Clauses
This equipment meets the requirements of IEC 62196-1:2022 clause 10.1, 10.2, 26.6, etc.
Equipment Overview
It is used in conjunction with the testing probe to ensure accuracy and convenience. Among the two output electrodes, the low potential (red) is connected to the live part of the electrical appliance, while the high potential is linked to the input terminal of the probe. At this point, activate the circuit and press the start button. Then, carefully use the probe to test any parts that may be electrified. If a voltage reading appears, it indicates that the tested part is live. After testing, press the reset button and safely disconnect the circuit.
Technical Parameters
| Applied Standards | IEC 62196-1Ed.4CDV 2020 |
| Applied Clauses | Clause 10.1, 26.6. |
| Working Voltage | AC 220V±5%, 50HZ±1% |
| Electrode output the testing voltage | AC 0-62V, DC 0~62V, can be switched |
| Relative Humidity | ≤80% |
| Temperature Range | 0-40℃ |
| Use Requirements | No shaking and no corrosive gas |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.