Climate Chamber Rapid Temperature Change Thermal Shock Testing Equipment 64L
Climate Chamber Rapid Temperature Change Thermal Shock Testing Equipment 64L
Complied Standards & Clauses
This thermal shock test chamber conforms to IEC 60068-2-14 (Test Na) and it is required by IEC 62196-1:2022 clause 34.3.
The 3-Zones Thermal Shock Test Chamber is required by IEC60335 Annex J, meets the standard requirements of IEC 60068-2-1:2007, Environmental Testing—Part 2-1: Tests—Test A: Cold, IDT; IEC 60068-2-2: 1974 Environmental testing for electric and electronic products—Part 2: Test methods—Tests B: Dry heat; IEC 60068-2-14:1984, Basic environmental testing procedures—Part 2: test-test N: Change of temperature, IDT; MIL-STD-883 and etc.
Product Overview
This equipment is suitable for testing a wide range of materials and products, including metals, plastics, rubbers, electrical components, and electronic devices. It is designed to evaluate the effects of rapid temperature fluctuations on the test samples, simulating real-world conditions to assess their durability and performance under extreme thermal stress.
Technical Parameters
| Temperature shock range | -40～+150℃ |
|
Cold storage temperature range in low temperature zone |
-10℃～-50℃ |
|
Heat storage temperature range in high temperature zone |
+50℃～+180℃ |
| Impact reset time | About 5 mins |
|
The constant temperature time of high-low temperature shock |
Above 30 mins |
| Conversion time | ≤10s |
|
Temperature fluctuations in the sample area |
±0.5℃ (at constant temperature) |
| Temperature accuracy range | Setting accuracy: ±0.1℃, indication accuracy: ±0.1℃, resolution: ±0.1℃ |
| Temperature variation | ±2°C (no load, at constant state) |
| Temperature sensor | High-precision A grade PT100 temperature |
| The refrigerant | R404a, R23 |
| Chamber structure | With independent product test area, high temperature storage area, low temperature storage area |
| Inner chamber material | SUS304 stainless steel plate |
| Inner chamber material (W*H*D) | 400×400×400 |
| External chamber material (W*H*D) | 1440×1910×1825 |
| External chamber material | Cold rolled board baking varnish |
| Insulation material | Rigid polyurethane foam + insulation cotton |
| Circulation method | Multi-wing fan |
| Heater | Nickel alloy electric heater |
| Condenser | Shell-tube condenser(water-cooled) |
| Evaporator | High-performance fin type with automatic load capacity adjustment, which can be used for a long time under low temperature and high humidity conditions without frosting |
| Controller | 7-inch color LCD touch control screen + PLC module |
| Program capacity | Usable program capacity: 120 groups at most; time setting: 99 hours and 59 minutes per segment; |
Details
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.