MIL-STD-810F Battery Hydraulic Mechanical Shock Testing Machine
MIL-STD-810F Battery Hydraulic Mechanical Shock Testing Machine
Complied Standards & Clauses
The equipment meets the test specifications of MIL-STD-202F, IEC-68-2-27, MIL-STD-810F, MIL-STD-883E, etc.
Product Overview
This shock test machine is designed for evaluating the mechanical robustness and structural integrity of products under impact conditions. It is widely used in fields such as electronics, aerospace, military, automotive components, shipping, and transportation. By configuring different waveform generators, it can perform a variety of shock tests including half-sine wave, post-peak sawtooth wave, and square wave simulations.
Environmental requirements:
1. On-site temperature: 5℃~+28℃ (average temperature within 24 hours ≤28℃);
2. Relative humidity: ≤ 85% RH;
3. Air source: 0.5--0.8MPa
4. Power supply conditions: three-phase five-wire;
5. Voltage range: AC380V;
6. Allowable frequency fluctuation range: (50±0.5)Hz;
7. The grounding resistance of the protective ground wire is less than 4Ω;
8. The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be used independently for this equipment.
Technical Parameters
| Work Platform | 1000 × 1000 mm |
| Work surface material | High-strength imported high-quality aluminum alloy |
| Maximum load | 200kg |
| Half-sine peak acceleration | 15—300 G |
| Half-sine pulse duration | 3.5—30ms |
| Lifting method | Hydraulic lift |
| Device size | Approx. 2150 × 1450 × 2250mm |
| Total equipment | About 3000 kg |
| Measurement system | |
| Input Channels | 2 channels |
| Sampling frequency | 192KHz |
| Input form | Voltage, charge |
| Voltage range | -10V--+10V |
| Coupling method | AC,DC,ICP |
| Shock Waveform | Half Sine |
| Communication interface | USB2.0 |
| Supported standards | National standard, national military standard, US military standard, user-defined standard |
| Operating system | Microsoft Windows7/10 |
Details
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.