IEC 60529 SUS304 Stainless Steel IPX8 Immersion Test Tank with 4.0 Bar Pressure and PLC Control
Price:
Negotiable
MOQ:
1
Delivery Time:
30 days
Brand:
Sinuo
Product Description
IEC 60529 High Pressure Immersion Test Tank IPX8 Waterproof Submersion Testing Machine
This professional testing equipment is designed for evaluating the waterproof capabilities of electrical and electronic products that may be subjected to immersion in water during transportation or use. The system immerses test specimens at specified depths and pressures, then examines water ingress and performance changes.
Compliance Standards
Conforms to IEC 60529:2013 IPX8 and related standards
Technical Specifications
| Inner Tank Diameter | 350mm |
| Internal Tank Height | 590mm |
| External Dimensions | Approximately 360mm outer diameter * 900mm height |
| Stainless Steel Thickness | 5mm |
| Time Control | 1～99999 seconds |
| Pressure Management | Manual adjustment |
| Pressure Display | Touchscreen display for pressure setting and monitoring |
| Pressure Adjustment Range | Atmospheric pressure to 500 kPa (1-50m water depth) |
| Maximum Limit Pressure | Factory configurable with pressure switch protection (typically 550 kPa auto-vent) |
| Pressure Protection | Spring-loaded safety relief valve; Program control with automatic shutdown and pressure release |
| Pressure Release Method | Automatic pressure release after test completion |
| Lid Operation | Manual opening and closing |
| Pressurization System | External air supply (user provided, ≥ 5 kg) |
| Control System | Touch screen control |
| Container Material | 304 stainless steel |
| Drain Pipe Diameter | 1/2 inch pipe |
| Power Requirements | AC 220-240V, 50Hz±10%; Power: 1KW; Separate 16A circuit breaker required |
| Environmental Conditions | Temperature: 15℃ to 35℃; Relative humidity: 25% RH to 75% RH; Atmospheric pressure: 86 kPa to 106 kPa |
Pressure Conversion Reference
| 0.1 MPa | = 1 Kg/cm² = 10M water depth |
| 0.2 MPa | = 2 Kg/cm² = 20M water depth |
| 0.3 MPa | = 3 Kg/cm² = 30M water depth |
| 0.4 MPa | = 4 Kg/cm² = 40M water depth |
Key Features
- Pressure protection and explosion-proof device
- Drainage and pressure relief system
- Alarm sound notification for safety
- Robust 304 stainless steel construction
- Intuitive touchscreen control interface
Installation Note: Plan equipment placement carefully. Install circuit breaker nearby and drain pipe below the circuit breaker. Power cord must be ≥2.5㎡ with terminal blocks.
Product Images
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Sinuo Testing Equipment Co. , Limited
Location
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact Person
Zoe Zou