IEC 62196 EV Connector Testing Equipment Withdrawal Force Latching Verification
IEC 62196 Electric Vehicle Withdrawal Force And Latching Verification Test Equipment
Complied Standards & Clauses
IEC 62196-1:2020 clause 16.16.
Equipment Overview
This withdrawal force test apparatus is required by IEC 62196-1Ed.4CDV 2020 clause 16.16.
Test principle: The fixed accessory (the socket-outlet or vehicle inlet) is mounted such that the mating accessory moves vertically downward into it during the first stage of insertion. A principal weight of 9,2 kg is suitably placed on the mating accessory. If the moving accessory does not enter the fixed accessory to the position required, a supplementary weight of 0,8 kg is allowed to fall from a height of 5 cm onto the principal weight. The moving accessory shall then enter the fixed accessory to the position required to engage the contacts properly.
Technical Parameters
| Applied Standards | IEC 62196-1 Ed.4 CDV 2020 |
| Applied Clauses | Clause 16.16 |
| Withdrawal Force weight | 1kg |
| Insertion Force Weight | 9.2kg |
| Insertion Auxiliary Weight | 0.8kg |
| Equipment Test plugs | Customized |
|
A. Insertion force test: 1. A fixed insertion force device for socket or appliance input socket 2. Force weight kit: 9.2kg, auxiliary weight 0.8kg 3. Drop height limit of auxiliary weight: 50mm 4. 2kg weight |
|
|
B. Withdrawal force test: 1. Shared the mechanical part of SN1013, based on IEC 62196-1 :2020 Figure 13 2. Shared the test plugs for SN1013 3. Counterweight, make the lifting accessories (gauge + hook + weight) to be 9kg, and the supplemental weight is 1kg 4. 1kg weight |
|
Details:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.