IEC 60529 IPX1 to IPX7 Water Ingress Protection Test Equipment
Comprehensive testing system for verifying water ingress protection levels from IPX1 to IPX7 according to IEC 60529:2013 standards. This equipment evaluates the protective performance of enclosures for electronic and electrical products, automotive components, household appliances, and lighting devices.
Standards Compliance
Fully compliant with IEC 60529:2013 "Degrees of protection provided by enclosure (IP code)" covering IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, and IPX7 protection levels.
Equipment Overview
Applications
- Electronic and electrical products
- Automotive and motorcycle components
- Household appliances and communication devices
- Outdoor lighting and signal equipment
Testing Capabilities
- IPX1/IPX2: Water dripping tests
- IPX3/IPX4: Water spraying and splashing tests
- IPX5/IPX6: Water jet tests
- IPX7: Temporary water immersion tests
System Structure
Complete system includes drip mechanism, oscillating mechanism, water jet mechanism, immersion tank, electrical control cabinet, and turntable. Features motor-controlled lifting, adjustable rotation speeds, and integrated water filtration system.
Technical Specifications
Electrical Control & Water System
| Parameter | Specification |
|---|
| Power Supply | AC380V±5%/50Hz, 10KVA |
| Large Flow Branch (IPX5/6) | 10-100L/min, ±0.5L/min accuracy |
| Small Flow Branch (IPX1-4) | 1-10L/min, ±0.5L/min accuracy |
| Pressure Range | 0.1-3Kg/cm² |
| Immersion Tank Volume | 500L (600×600×1400mm) |
IPX1/2 Drip Test Device
| Parameter | Specification |
|---|
| Drip Area | 1000×1000mm (customizable) |
| Drip Height | 200mm (automatically measured) |
| Drip Speed | 1±0.5mm/min or 3±0.5mm/min |
| Needle Aperture | Φ0.4mm |
| Test Duration | 0-99.9 minutes (presettable) |
IPX3/4 Oscillating Spray Device
| Parameter | Specification |
|---|
| Oscillating Radius | R200-R1600mm (stainless steel) |
| Water Flow | 1-10L/min adjustable |
| Oscillating Speed | IPX3: 4s/cycle; IPX4: 12s/cycle |
| Spray Holes | Φ0.4mm, 50mm spacing |
IPX5/6 Water Jet Nozzle
| Parameter | Specification |
|---|
| Nozzle Diameter | IPX5: Φ6.3mm; IPX6: Φ12.5mm |
| Water Flow | IPX5: 12.5±0.625L/min; IPX6: 100±5L/min |
| Test Distance | 2.8m from nozzle to sample surface |
IPX7 Immersion Chamber
| Parameter | Specification |
|---|
| Chamber Size | 600×600×1400mm |
| Maximum Depth | 1200mm (1mm resolution scale) |
| Basket Size | 500×500mm stainless steel |
Turntable
| Parameter | Specification |
|---|
| Diameter | Φ600mm |
| Rotation Speed | 1r/min |
| Bearing Capacity | ≤50kg |
| Tilt Capability | 15° for IPX2 testing |
Environmental Requirements
- Temperature: 15-35°C
- Relative Humidity: 25%-75%
- Atmospheric Pressure: 86-106kPa
- Water Source: Clean water or tap water with filtration
- Flat ground with proper water intake and drainage
