2880L Programmable Temperature Humidity Walk-In Test Chamber -40℃ to +85℃ Range with 30-95% RH Control
Price:
Customized
MOQ:
1
Delivery Time:
45 days
Brand:
Sinuo
Product Description
Compliance Standards
This walk-in test chamber complies with multiple international testing standards:
- IEC60068-2-1:2007 - Environmental Testing - Test A: Cold
- IEC60068-2-2:2007 - Environmental Testing - Test B: Dry Heat
- IEC60068-2-30:2005 - Environmental Testing - Test Db: Damp Heat, Cyclic
- IEC60068-2-78:2012 - Environmental Testing - Test Cab: Damp Heat, Steady State
Equipment Overview
This programmable temperature and humidity chamber meets IEC 62368-1:2018 requirements and is designed for comprehensive environmental testing of electronics, electrical components, plastics, and raw materials. The chamber validates product reliability during storage and transportation under alternating high/low temperature and humidity conditions.
Key Features
- Advanced structural design with standardized manufacturing processes
- Premium international brand components for optimal noise control and energy efficiency
- Enhanced safety and reliability for long-term, high-frequency operation
- Excellent operability, maintainability, and temperature stability
- Environmentally safe operation with no harmful emissions
Technical Specifications
| Parameter | Specification |
|---|---|
| Volume Capacity | 2880L |
| Internal Dimensions | 2400mm (W) × 800mm (D) × 1500mm (H) |
| Temperature Range | -40℃ to +85℃ |
| Humidity Range | 30% to 95% RH |
| Temperature Uniformity | ≤2.0℃ |
| Heating Rate | 2℃-3℃/min (RT to 100℃) |
| Cooling Rate | 0.7℃-1℃/min (RT to -40℃) |
| Operating Noise | ≤80dB(A) |
| Weight | Approximately 1500 kg |
| Sample Rack Capacity | ≥30kg per layer |
Construction & Design
The chamber features a modular design with double-sided galvanized steel outer walls and SUS304 stainless steel inner walls. Insulation consists of high-performance polyurethane and glass wool materials.
Control System
Equipped with a 7-inch color touch screen controller supporting both Chinese and English display. The system offers fixed value and programmable modes with PID control for precise temperature and humidity regulation.
Safety Features
- Multiple over-temperature protection systems
- Compressor overpressure and overheating protection
- Fan overheating protection
- Power failure protection with automatic recovery
- Phase sequence and phase loss protection
- Leakage protection and ground fault detection
Installation Requirements
Requires AC380V three-phase power supply, level installation surface with minimum 800kg/m² load capacity, and adequate ventilation space around the unit.
Important Notes
This chamber is not suitable for testing flammable, explosive, corrosive, biological, radioactive, or toxic substances. Proper installation and maintenance space must be provided for optimal performance and safety.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Sinuo Testing Equipment Co. , Limited
Location
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact Person
Zoe Zou