IEC 61851 EVSE Testing Equipment with 600N Pull Force and 11N.m Torque for Connector Cable Strain Relief
Price:
Negotiation
MOQ:
1
Delivery Time:
30 days
Brand:
Sinuo
Product Description
Compliance Standards
- IEC 61851-1 2017 Electric vehicle conductive charging system - Part 1: General requirements clause 11.6
- IEC 62196-1 Ed.4CDV 2020 clause 25.3 Figure 17 and table 11
- IEC60309-1: 2012 clause 23.3
Equipment Overview
This cable strain relief test equipment evaluates vehicle plugs, socket-outlets, and connectors for durability under specified pull force and torque conditions. The system employs a single-phase speed-regulating motor with eccentric mechanism for precise pull force application and an air cylinder for controlled torque weight release.
Technical Specifications
| Parameter | Specification |
|---|---|
| Operation Method | Button operation |
| Drive Mode | Motor and cylinder |
| Pull Force Range | 40N, 50N, 60N, 110N, 250N weights (achieving 160N, 200N, 240N, 250N, 500N, 600N) |
| Torque Range | 6N, 7N, 12N, 15N, 23N, 110N weights (achieving 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m) |
| Torque Arm | Ф200mm |
| Pull Frequency | 1 cycle/s |
| Pull Cycles | 1-999999 cycles (presettable, default 100 cycles) |
| Torque Applied Time | 0-99999.9S (presettable, default 1 minute) |
| Fixture | One set of universal fixtures |
| Dimensions | 1560mm × 600mm × 1530mm |
| Weight | Approximately 220KG |
| Power Supply | Single phase AC220V±10%, 50/60Hz or AC110V, 60Hz |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Sinuo Testing Equipment Co. , Limited
Location
Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone, Shibi Street, Panyu District, Guangzhou, China
Contact Person
Zoe Zou