High power fiber optic PoE injector up to 90W power Enhance Your Network Setup
High power fiber optic PoE injector up to 90W power Enhance Your Network Setup
Product Review:
Fiber optic PoE injector Power over Ethernet (PoE) Capability: The PT-PSE109GBRO-A-S 90W fiber optic
PoE injector enables the simultaneous transmission of power and data over a single Ethernet cable.And the
enhance enhance network fiber optic PoE injector is a good choose.
Product Specifications:
| Parameter | Description |
| Key Features | Industrial Fiber PoE can be outdoor use by covered with waterproof case |
| Surge protection both at PoE port and AC port | |
| 1000Base-FX to 1000Base-TX | |
| SFP slot for Multi mode or Single mode SFP transceiver | |
| Gigabit data rates | |
| AC power cord with optional US or EU plug or other standard plug | |
| IP20 high-impact metal enclosure | |
| Extend temperature from -40℃ to 65℃ | |
| Diagnostic LEDs | |
| Part Number | PT-PSE109GBRO-A-S Fiber optic PoE injector |
| Ports condition | SFP Port*1, LAN Port*1, AC Input Port*1, PoE Output Port*1 |
| Regulatory Compliance | IEEE802.3bt |
| RoHS Compliance | |
| WEEE Compliance | |
| Pass Through Data Rates | 1000 Mbps |
| Fiber optic PoE injector Output | Pin Assignment and Polarity: |
| 4/5(+), 7/8(-) and 3/6(+),1/2(-) | |
| Output Power Voltage: 55Vdc | |
| User Port Power: 95W Guaranteen |
Company Introduction:
PROCET(Creative Lianjie Network Technology Co.,Ltd) maked in 2000. PROCET mainly R&D on the PoE
(Power over Ethernet) series product, Outdoor PoE, indoor PoE, Lightning&surge protection PoE.-40℃ to +65℃
PoE,PoE splitter 12v, PoE extender and Fiber optic PoE injector. We registered PROCET Technology Co., Ltd in
HONGKONG in 2019.PROCET PoE injector has been widely favored by customers since its development.
Certification:
Shipping and Payment:
| MOQ | 1PC |
| PORT | SHENZHEN |
| PAYMENT TERMS | T/T,WESTERN UNION/PAYPAL |
| PRODUCING CAPACITY | 500,00 Per/Month POE Module and POE Splitter,10000 Per/Month Fiber optic PoE injector |
| LEADING TIME | SMALL quantities in stock.Large quantities 20-30 days |
| PACKAGE | Carton packaging |
FAQ:
1.1.How many Ethernet ports does the 109GBRO-A-S Fiber optic PoE injector have?
The 109GBRO-A-S Fiber optic PoE injector typically has SFP Port*1, LAN Port*1, AC Input Port*1 and PoE Output Port*1.
2.How does the 109GBRO-A-S Fiber optic PoE injector work?
The 109GBRO-A-S PoE injector works by injecting power into the Ethernet cable alongside the data signal.
3.What is the power output of the 109GBRO-A-S PoE injector?
The 109GBRO-A-S Fiber optic PoE injector provides a maximum power output of 90 watts.
4.Can the 109GBRO-A-S PoE injector be used with any PoE-enabled device?
Yes, the 109GBRO-A-S Fiber optic PoE injector is compatible with any device that supports PoE, such as IP phones,
security cameras and wireless access points.
5.Does the 109GBRO-A-S Fiber optic PoE injector support IEEE 802.3af and IEEE 802.3at standards?
Yes, the 109GBRO-A-S PoE injector supports both IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) standards.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.