Delivery method:

ClF

Description:

1.Fenton CT0235 is a curing agent suitable for the production of impregnated paper with low pressure and short lead time, it can only be used in melamine formaldehyde (MF) resin.

2.CT0235 can lead to better curing performance of melamine formaldehyde resin, compared with common simple MF curing agent (such as morpholine), Specifically, better latency to achieve longer shelf life for impregnated paper.

3. The latency of ct0235 results in the slow curing at low temperature (< 130 ℃) to ensure enough spreading time for MF resin, meanwhile rapid curing at high temperature to provide uniformity. dry and wer flaw, heat mark can be reduced, also the stain-resistance can be improved.

4.Improve the clarity of decorative wood grain

5.Extend the active period of the MF resin stored at room temperature.

6.The use of CT0235 can effectively improve the pollution resistance level of the plate surface .

7.The latency of CT0235 is slightly lower than CT0233.

Applications:

1.Added to the system with 0.2-0.4% weight of liquid resin, gel time is 4-8 minutes at 100℃water bath.

2.The amount of curing agent varies with the reactivity and the pH value of the resin. Before used, appropriate curing time should be determined according to the type of impregnated paper, and the accurate dosage of curing agent should be determined by lab testing.

3.It is suggested to be used for impregnated paper with long-time transportation and long storage time.

*Note:the curing agent should be added at last, after other additives. the curing time should be tested. Only after the curing time reaches the qualified value, can it be poured into the glue tank.

Notices:

1.The storage period is one year, please use it as soon as possible.

Disclaimers:

The information and suggestions mentioned above are based on the experience of laboratory testing and daily use. lots of factors are involved in the manufacturing process, which are beyond our control. Therefore, the above information and suggestions could not account for every customer. We suggest adaptability test before use in batches. For the problems occurred, we only undertake the loss not greater than the value of products.