Amino Resin Anti Wear Additive
Melamine Laminating Anti Wear Additive AW20 Impregnated Paper
characteristic:
| Color | White or light gray |
| Density | 1.30-1.45g/ml |
| pH | 7.0-7.5 |
| Storage(25℃) | one year in a closed container. |
| Flash point | noncombustible |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| Product Group | Anti-wear additive |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| State | liquid |
| Type | Organic Mixture |
| Application | melamine-formaldehyde(MF) resin |
| Bio-based Content | 50%-55% |
| Effect:wood processing | Second stage coater |
| Market | Impreganted paper |
| Solubilit in water | Soluble/decor paper |
| Boiling point | About 90-100℃ |
| Volatile component(%volume) | N/A |
| Relative vapor density (air＝1) | N/A |
| Heat of combustion(ºC): | N/A |
| Toxic | N/A |
| Lower explosive limit% | Not applicable |
| Net Weight | 1000kg / 200kg |
| Dimension | 1200*1000*1160mm |
| Outer packaging | Galvanized steel |
| inner packaging | HDPE |
| Certification | ISO9001 ISO 45001 ISO14001 |
if you want to kown more about the product,contact with us please.
Description:
FENTENG AW45 is a water-based anti-wear agent synthesized by special aluminum oxide and specific additives
AW45-wear-resistant agent is a highly efficient dispersive & anti-wear agent specially developed for the impregnation process of high-pressure/low-pressure decorative paper. Due to its very strong fusion, it can be uniformly dispersed in the melamine formaldehyde resin, specific particles of AL2O3. It can enhance the hardness of the impregnated paper surface.
Applications:
1. The best dosage of anti-wear agent is 6%-8% of the the melamine formaldehyde resin,The specific amount shall be adjusted by the customer according to the decorative panel pressing and pasting process, increasing the amount is conducive to rapid plate production.
2. It is recommended to start adding 6% by weight of melamine formaldehyde resin.
3.This product is usually added to the second stage coater in the impregnated paper process.
4.This product has a certain amount of AL2O3. precipitates, and the AW45 must be stirred evenly with a mixer before use.
Disclaimers
The information and suggestions mentioned above are based on the experience of laboratory testing and daily use. lots of factors are involved in the manufacturing process, which are beyond our control. Therefore, the above information and suggestions could not account for every customer. We suggest adaptability test before use in batches. For the problems occurred, we only undertake the loss not greater than the value of products.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.