FENTENG Soluble Dispersant Additive Impregnated Paper Light Yellow
FENTENG DS101 Dispersant Additive Impregnated Paper Modified Additives
| Color | Colorless or light yellow |
| Density | 1.150-1.250 g/ml |
| pH | 7.2-8.2 |
| Product Group | Additive |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| State | liquid |
| Effect: | Improve the performance of MF |
| advantage | Cost effective |
|
Type
|
Polymer Solution |
| application | Melamine formaldehyde/Urea-formaldehyde (MF/UF) resin |
| Bio-based Content | 30%-60% |
| wood processing | Seond stage coater |
| Market | Impregnated paper |
| Solubilit in water | soluble |
| Boiling point | About 100-110 ℃ |
| Flash point | ≥200℃ |
| Relative vapor density (air＝1) | N/A |
| Heat of combustion(ºC): | N/A |
| Lower explosive limit% | Not applicable |
| Toxic | N/A |
| Shipping | CIF |
If you want to konw more detail ,pls contact with us .
Description:
By using internal release DS211 agents even at low temperatures and short pressing cycles (less than 10 sec, for instance), a contamination of press plates is avoided and a closed laminate-surface is achieved. Hence, there is no need to use external release agents.
By removing resin and pigment residues constantly from the press plates, PATTM-release agents also show a cleaning effect (results vary from grade to grade). Thus, for instance during CPL production (Continuous Process Lamination), there is minimal accumulation of residue on the press over long periods of time so that high quality laminates can be produced continuously without problems.
When using internal DS211-release agents, you will be able to achieve shorter cycle times.
We offer internal DS211-release agents for UF, MF, MUF, PF and MUPF resin systems for various application areas: A wide choice of environmentally friendly products is available for your needs!
PRODUCT APPLICATION
Under normal circumstances, according to the different dispersing pigments, the dosage ratio is: dispersant DS101: pigment=3:1 (generally, there is no need to add water, if you want to reduce the viscosity of the dispersion, you can add an appropriate amount of water according to the actual production needs)
*Note:
Because of the different formulations, it is recommended that customers determine the best dosage should be tested.
The information and suggestions mentioned above are based on the experience of laboratory testing and daily use. lots of factors are involved in the manufacturing process, which are beyond our control. Therefore, the above information and suggestions could not account for every customer. We suggest adaptability test before use in batches.
FQA:
Q. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q. Do you have any MOQ limit for the order?
A: Low MOQ, 20kg for sample checking is available.
Q: How can I place order?
A: You can contact us by email about your order details, or place order online.
Q: How can I pay for you?
A: After you confirm our PI, we will request you to pay. L/C or T/T is the most usual ways we are using.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.