ISO9001 Durable Resin Mold Release Additives For Wood - Based Panel Production
ISO9001 Durable Resin Mold Release Additives For Wood - Based Panel Production
Product Specification
| Appearance | Colorless or amber |
| Density | 1.040-1.100 g/ml |
| pH | 7.5-8.5 |
| Storage | can be stored at 25℃ for one year in a closed container. at higher temperature, the storage period decreases slightly. It may coagulate at low temperature(<10℃), but its effect will not be affected after thawing. |
| Package | 200kg round plastic drum or 1000L square plastic drum |
If you want to know more about the product,please contact with us ,we will reply to you in 24 hours.
Product Describtion
BR001 is a mold release agent suitable for production of impregnated paper with low pressure and short lead time. It is used in urea formaldehyde (UF)resin and melamine formaldehyde(MF) resin.
Product Performance
Good mold releasability, low foamability and good dispersing property. Accompanied with our foamless penetrating agent, flowability of resin is improved, reduce the stripe and powder on the surface is reduced.
Good mold releasability results from high temperature resistance and fast detach from the resin, the medal template is clean after long work. Without frequent cleaning efficiency is improved.
BR001 is easy to use, nontoxic and easy to disperse. Even some UF resin seeps to surface, mould releasing can still process, to achieve perfect impregnation effect.
Product Application
The products are used in the production of low pressure melamine board impregnated paper, high pressure fire-proof board impregnated paper, phenolic resin template impregnated paper, particleboard and medium density fibreboard and other decorative board
Leak handling
This product is a non-flammable and explosive industrial grade chemical product and cannot be used in any food and medicine.
When the product leaks, it is recommended that the operator wear a dust mask, wear a gas-proof suit, and do not touch the leaked material. When a small amount of leakage occurs, rinse and dilute with a large amount of water. When a large amount of leakage occurs, it should be covered with plastic sheet, and then collected and recycled.
Related Information
A water-based mould release agent specially designed for the use of rotating spray equipment in wood-based panel production process.
Rainmaker enables a more uniform distribution of the release agent on the fiber pad, but easy to produce the phenomenon such as too many bubbles and bacteria and jams. Such clogging in thin plates, such as door panels, can create uneven surfaces and impede heat transfer, resulting in reduced production rates.
BR001 will not cause similar problem mentioned above. Good demoulding efficiency, improve the surface quality of wood-based panel, can speed up heat conduction, improve production efficiency, reduce pinhole phenomenon, achieve the purpose of protecting hot pressing template.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.