FENTENG CT0320 Latent Curing Agent Decorative Additives For Paper
Latent Curing Agent Decorative Paper Additives FENTENG CT0320
| Color | Colorless or light yellow |
| Density | 1.2-1.3 g/ml |
| pH | 3.0-4.0 |
| Product Group | Catalysts |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| State | liquid |
|
Type
|
surfactant |
| Be used in | Melamine formaldehyde(MF) resin |
| Bio-based Content | 0%-30% |
| Effect:wood processing | Seond stage coater latent |
| Market | Wood precessing |
| Solubilit in water | soluble |
| Boiling point | About 90-100c |
| Volatile component(%volume) | N/A |
| Relative vapor density (air＝1) | N/A |
| Heat of combustion(ºC): | N/A |
| Lower explosive limit% | Not applicable |
Description:
1.CT0320 is a MF curing agent with wide resin applicability and good latency (latency is no curing at low temperature, fast curing at high temperature)
2.In the low-formaldehyde formula and rapid pressing process formula, CT0320 can provide better latency.
3.Stronger latency, no curing at lower temperature, rapid curing at high temperature. Using this product can make the resin flow better under pressure and cure more uniformly.
3. With the plasticizer RP107, it can improve the film-forming properties of the resin and improve the pollution resistance. .
4.Improve the clarity of decorative wood grain
5.Extend the active period of the MF resin stored at room temperature.
Applications:
1.Add about 0.1-0.4% of MF to the liquid resin
2.The degree of reaction depends on the PH value and reactivity of the resin. The boiling water curing time of the resin ranges from 4-8 minutes.
3.The curing agent should be added last after adding other kinds of additives
*Note:, the curing agent should be added at last, after other additives. the curing time should be tested. Only after the curing time reaches the qualified value, can it be poured into the glue tank.
Amino resin is a thermosetting resin by condensation of amino compounds and formaldehyde. It is customary to refer to melamine formaldehyde resin and urea formaldehyde resin as amino resin.
Curing time :
Put 12 grams of resin solution into a 16 mm x 160mm (approximately .32cc) test tube. Add this curing agent. Immerse in boiling water and stir until the precipitation and turbidity appear. The time taken is the "curing time", usually 3-5 minutes.
FQA
Q: how to get samples?
A:We provide free samples, but the freight will be borne by you, and the cost will be returned to you or deducted from your order later.
Q: how to confirm product quality before placing an order?
A: you can get free samples for some products. You only need to pay for transportation or arrange express delivery to take samples for us. You can send us your product specifications and requirements. We will make products according to your requirements
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.