Brown Color MR0306 Anti Dusting Additives Chemical Auxiliary Agent
Brown Color MR0306 Anti Dusting Additives Chemical Auxiliary Agent
Product Specification
| Color | yellow or brown liquid |
| Density | 0.900-1.00 g/ml |
| pH | 6.5-7.5 |
| Storage(25℃) | one year in a closed container. |
| Flash point | noncombustible |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| Product Group | Catalysts |
| Package | 200kg round plastic drum or 1000L square plastic drum |
| State | liquid |
| Type | Organic Mixture |
| Application | Urea-formaldehyde(UF) resin |
Product Describtion
MR306E is an upgraded version of MR306,It is a very efficient anti-dust agent that significantly prevents blisters during drying, thereby creating a very smooth film appearance. A dosage of 0.1 – 0.2% is usually sufficient to impede dust formation, even at high line speeds and sharp drying conditions.
Product Performance
MR0306 can be used in low pressure impregnated paper and high pressure fireproof paperboard, providing smooth, delicate, bright paper surface, and improving the softness of the paper.
It can inhibit the excessive aging of resin and reduce the dust, so the loss of resin is reduced, the cost is reduced, and the environment and the health of the workers are also protected.
Product Application
Generally, the dosage is 0.1-0.3% weight of the second stage liquid resin, and the maximum 0.5%. in order to achieve better dedusting and brightening effect. It is suggested that the minimum dosage should be determined from 0.15%.
*The products are used in the production of low pressure melamine board impregnated paper, high pressure fire-proof board impregnated paper, phenolic resin template impregnated paper, particleboard and medium density fibreboard and other decorative board
Related Information
Anti dust and brightening agent is suitable for low pressure melamine formaldehyde resin impregnated paper and high pressure fire board paper production, Make melamine-impregnated paper smooth and exquisite, bright and shiny paper effect, at the same time improve the softness of the paper. Inhibiting excess resin aging and raise the utilization rate of the resin by reducing dust, reducing wear and tear, reduce costs, protect the production workshop environment health and the health of production personnel
The amount is 0.1-0.3% by weight of the second liquid resin, and the user can add it in the range of 0.5%. Such as the use of impregnated paper furniture, Suggestions according to the production assessment to determine the minimum consumption. The usual dosage is from 0.15%.
* note: Dust remover should be added before hardener, and then test the curing time.
20 ℃ ambient temperature preservation, below this temperature could condense or precipitation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.