0.75CT 1CT 2CT Single Point Diamond Wheel Dresser Grade 100#TA

0.75CT 1CT 2CT Cylinder Diamond Wheel Dresser For Abrasive Wheels Grade 100#TA

Description:

Single Point Diamond Dresser select the nature diamond as raw material, and the natural diamond will be carefully inlayed into the certain specifications handle body. It is mainly used for dressing all kinds grinding wheels with high precision. According to the grain of natural diamond, we can use the sharp point of the natural diamond to dress the grinding wheels and guarantee the processing precision of the grinding wheels. In the high-hardness wheels dressing, the effect is more obvious.

The Single Point Diamond Dresser is more versatile dressing tool, which is used for turning and dressing of grinding wheel. They are made of carefully selected raw diamonds mounted in holders by means of special bonds. The dressing tool takes care of two main functions, it removes abrasive grains which have become completely worn out, and it recreates the correct geometric shape of the grinding wheel.

Single point "bruted diamond" dressers are made with selected "Congo Rounds" mounted in a matrix. A Single cutting edge is presented to the grinding wheel.

Diamonds for single point dressers are selected in accordance with quality and size. The question of using a superior, average or commercial quality depends on the grinding finish required and the machines and working parameters.

We offer three grades namely A, B & C for all the diamond size, Availability: 0.25 Ct to 5.00 Ct

Natural Point Diamonds: The Diamond points are naturally formed. (Not man made like grades A, B, & C) This is a gift of nature. Natural Point Diamond Dressers have high form retention properties. Availability: 0.10 Ct to 2.50 Ct

Specification for our HID-V series diamond dresser:

Optical Properties of Diamond:
- Brilliance diamond has extremely high reflectivity, its reflection critical angle is small, the range of total reflection is wide, light is prone to total reflection, and the amount of reflected light is large, thus producing high brightness.
- Scintillation: The flicker of diamond is flash, that is, the reflection and flash of white light on its surface when the diamond or the light source and the observer move relatively. Colorless, transparent, well-crystallized octahedron or curved poly-shaped diamond, even without cutting and grinding, it can show good flashing light.
- Dispersion or fire: Diamond's diverse crystal faces are like a prism, which can decompose the white light that enters the crystal through refraction, reflection and total reflection into the constituent colors of white light-red, orange, yellow, green, Blue, indigo, purple and other shades.
- Luster: The outstandingly hard, smooth and shiny crystal surface or cleavage surface of corundum has a particularly strong reflection effect on white light, and this very characteristic reflection effect is called diamond luster.

Recommended Areas:
Dressing tool clamped as close as possible to avoid vibration
Angle of the dresser should be radial 10 ° to 15 °
Delivery up to 0.03 mm (30 microns)
Feed up to 0.2 mm
Good cooling, they must use the dressing at the start - otherwise danger of cracking
Turn to the formation of the diamond surface axially by 90 °
Timely comprise boosts efficiency

To maintain the trust of our customers, we are offering high quality Single Point Diamond Dressers. These dressers are used to abrasive grains from metals and to recreate the correct shape of the grinding wheel. We make use of specific quality diamonds, which are mounted in holders using special bonds. The Single Point Diamond Dressers are available in many sizes and specifications for the various needs of our customers.

The features for our HID-V angle diamond dresser:

- Long service time and reduce the dressing costs per workpiece
- High precision and efficiency when working, and optimize utilization of machine capacity
- Rapid incorporation of complex profiles in the grinding wheel
- Choose different diamond dressing tools on basis of diameter, width, and grain size of the grinding wheels
- The cross feed rate and cutting is dependent upon grain size, the lower the feed rate, the finer the surface finish

Application for Harmony HID-V series diamond dressing tools:
The product angle precision grinding for tool grinder, grinding machine inside the arc, outside the arc grinders and other precision molded wheel trim
For normal abrasive wheels and abrasive wheels for Bearing
For processing of Input shaft / Output shaft
For procession of Crankshaft and Gear