Coated Diamond Powder

W Coated 60/80 Mesh Diamond Dust Abrasive High Thermal Conductivity Description: Synthetic diamond has the advantages of high hardness, good wear resistance, high thermal conductivity, good electrical insulation, and corrosion resistance. It can be widely used in cutting, grinding, drilling and the electronics industry. However, the diamond surface is smooth and the surface energy is high. Can not be combined with other materials well, so the diamond surface needs to be

White Grey Cr Coated Diamond Powder 0-0.5um to 54-80um Description: With the development of diamond surface coating technology, because the surface coating can increase the strength of diamond particles, inhibit the graphitization and oxidative corrosion of diamond particles under high temperature conditions, fundamentally realize diamond abrasive particles and bond matrix The chemical and metallurgical combination of the steel, therefore, enhances the bond's holding force on

Mesh 35/40 100% Cu Coated Diamond Powder Single Crystal Description: We can supply high quality diamond coating service by using our unique chemical coating and electroplated coating technology, it includes Ni coating, Cu coating, Ti coating, and Cr coating services for mesh and micron diamonds. Coated diamond effectively enhances the retention between diamond particles and the bond,, reduces heat damage, protects diamond against oxidation and graphite, and prolongs the

Whirlwind Raw Materials 0-0.5 to 54-80 Micron Diamond Powder For Polishing Description: Plated diamond, also known as diamond coated or plated diamond, the diamond surface is coated with a layer of metal diamond gives many new features, in order to improve the diamond and matrix interfacial bonding ability, holding force and strength, reduce the thermal shock, protection against oxidation and graphitization of diamond, reduce the degree of thermal damage of diamond. To extend

SCDA 120/140 Mesh Diamond Powder 30% 56% Nickel Plating Description: SCDA nickel plating adopts Harmony's unique technology to carry out various proportions of electroless nickel plating on SCDA and series products (the weight gain ratio is usually 30%, 56%, 60%), which greatly enhances the relationship between SCDA and particles. The inter-holding force and heat dissipation capacity effectively improve the service life of the grinding wheel and the surface finish of the

Nickel Plated 200/230 Mesh Diamond Grinding Powder Regular Shape Description: Nickel-plated diamond is a layer of nickel plated on the diamond surface. It has a spiky protrusion and is suitable for the production of resin bond products. The burr-like surface is convex and the structure significantly improves the holding power between the diamond abrasive and the bonding agent. Avoid premature diamond shedding during use, increase diamond usage, and effectively extend product

OEM ODM Nickel Coated Diamond Powder High Hardness Description: Coated diamond and cubic boron nitride is to coat the surface of diamond and cubic boron nitride with a metal layer of specific thickness by electroless plating, electroplating and other methods to improve the bonding ability of diamond, cubic boron nitride and the bond. Enhance the abrasive holding force, cover up the defects of the abrasive, improve the strength of the abrasive particles, and at the same time,

325/400 mesh Plated Resin Bond Diamond Powder for Lapping Description: Plated diamond particle products are mainly divided into electro-plated diamond particles and chemical-plated diamond particles. One layer of metal is plated on the surface of diamond particles for improving holding force, reducing thermal shock, protecting the diamond surface from oxidation and graphitization so as to prolong service life of tools. Plated metals are nickel(Ni), titanium(Ti) and copper(Cu)

Synthetic 50/60 Mesh Coated Diamond Powder needle punch appearance Description: Plating products are mainly divided into electroplating and electroless plating. A layer of metal is plated on the diamond surface to improve its holding power, slow down the thermal shock, protect the diamond from oxidation and graphitization, and prolong the service life of the product. Generally, three chemical elements, nickel (Ni), titanium (Ti), and copper (Cu), are plated. Coated diamonds

50/60 Ti Coated Diamond Grit Powder ISO 9001 synthetic diamond dust Description: After coating, from the grinding heat buffer function, through contact with the adhesive, it is safe to resist the influence from the instant high temperature, hindering the speed of the diamond particles, maintaining the gripping force of the abrasive, and has excellent thermal conductivity, and its wide range Used in resin bond materials. Improve the binding force of abrasives and abrasives and

40/50 0.5%Titanium Coated Diamond Powder Blocky Shape Description: Coated diamond powder is also known as diamond coated or plated diamond. A layer of metal diamond is plated on the surface of diamond, which gives many new characteristics to improve the interface bonding ability, holding force and strength of diamond and matrix, reduce thermal impact, prevent diamond oxidation and graphitization, and reduce the degree of thermal damage of diamond. To extend the service life

Custom 30/40 Titanium Ti Coated Diamond Powder for Fine Polishing Description: Coated diamond powder is by adopting the method of chemical plating and electroplating on the surface of diamond coating a layer of certain thickness of metal layer, to improve the combination of diamond and binder ability, enhance abrasive holding force, obscure abrasive own defects, and improve the strength of abrasive particles, metal coating can isolate the air at the same time, improve heat

230/270 Artificial Cubic Boron Nitride CBN Superabrasives​ Description: Diamond has the advantages of high thermal conductivity, low density, high hardness, high compressive strength and thermal expansion coefficient and good matching with semiconductor materials. However, because diamond sawing tools and drilling tools are mostly produced by powder metallurgy, sintered The temperature can generally be as high as 900°C. However, when diamond is heated to about 700°C in the

Chemical Electroplated CBN Cubic Boron Nitride 170/200 mesh Description: Synthetic diamond has the advantages of high hardness, good wear resistance, high thermal conductivity, good electrical insulation, and corrosion resistance. It can be widely used in cutting, grinding, drilling and electronic industries. However, the diamond surface is smooth and the surface energy is high. It cannot be combined with other materials well, so it is necessary to treat the diamond surface

SGS 140/170 mesh Cubic Boron Nitride CBN for Surface Treatment Description: Synthetic diamond has the advantages of high hardness, good wear resistance, high thermal conductivity, good electrical insulation, and corrosion resistance. It can be widely used in cutting, grinding, drilling and electronic industries. However, the diamond surface is smooth and the surface energy is high. It cannot be combined with other materials well, so it is necessary to treat the diamond

ISO Mesh 120/140 Cubic Boron Nitride 60% Nickel Coated Description: Coating a layer of metal on the surface of diamond and CBN can give diamond and CBN many new characteristics to improve their interface bonding with the matrix, holding power and strength, slow down thermal shock, and protect diamond and CBN from oxidation and graphitization. Reduce their thermal damage and extend the service life of products. The metal to be plated is generally nickel, copper, silver, etc.

Monocrystal 400/500 Resin Bond Diamond Powder ODM OEM Description: Diamond has the advantages of high thermal conductivity, low density, high hardness, high compressive strength and thermal expansion coefficient and good matching with semiconductor materials. However, because diamond sawing tools and drilling tools are mostly produced by powder metallurgy, sintered The temperature can generally be as high as 900°C. However, when diamond is heated to about 700°C in the air,

120/140 Mesh 56% Nickel Coated Diamond Powder Black Dark Grey Description: Due to a series of excellent physical and chemical properties such as high hardness, high strength, high wear resistance and low linear expansion coefficient, diamond is being used more and more widely in the field of grinding processing. However, under normal temperature and pressure, diamond is in a metastable state, its heat resistance is not high, and there are some surface defects. During the

Cobalt Co plated Diamond Powder Abrasive 30/40 40/50 50/60 mesh Description: Coated diamond is the use of advanced chemical plating and composite plating technology to coat the diamond surface with a layer of metal through surface treatment, thereby increasing the adhesion of diamond in cutting and polishing tools and prolonging the service life of the tools. Using advanced plating technology, the product has dense plating and high grinding ability; The surface roughness of

OEM Silicon Si Coated Diamond Powder 60/70-325/400 Mesh In order to improve the service life of abrasive tools, people began to apply metal-coated diamond particles. After the metal is plated, the difference in surface energy between the diamond powder and the binder matrix is reduced, the bonding force between the two is strengthened and the shedding of diamond is reduced, thereby increasing the utilization rate of the diamond powder material. Moreover, it can also play a