Micron Diamond Powder

60% Nickel Coated Cubic Boron Nitride CBN Powder 60/80 - 325/400 Description: CBN (cubic boron nitride) is recognized as a new material whose hardness is second only to diamond, high temperature resistance is twice that of diamond, abrasion resistance is four times that of traditional abrasives, and it has extraordinary thermal conductivity. Unparalleled new CBN materials. In today's manufacturing arena, there are hundreds of raw materials to be ground, from super alloys and

HPHT HID WD 20PPM Micron Diamond Powder For Wire Description: Monocrystalline diamond powder is produced by HPHT (high-pressure, high-temperature) synthesis. The diamond particles feature an oriented crystal structure with parallel-running cleavage planes, similar to natural diamond. For diamond tools, particle fracturing provides a self-sharpening mechanism and thus increases tool life. Monocrystalline diamond powder is a popular choice for precision grinding, lapping and

Monocrystalline 30-40 Micron Diamond Powder Metal Bonded Description: Diamond powder is mainly used for fine grinding, grinding and polishing of non-metallic hard and brittle materials. Generally, 0~0.5 μm to 6~12 μm is used for polishing, 5~10 μm to 12~22 μm is used for grinding, and 20~30 μm is used for coarse grinding. Diamond powder is mainly used in the following four aspects: (1) Direct use to make abrasive paste. It is widely used in the polishing of cutting tools,

20-30um Single Crystal Diamond Micron Powder For Fine Grinding Description: Diamond powder is mainly used for fine grinding, grinding and polishing of non-metallic hard and brittle materials. Generally, 0~0.5 μm to 6~12 μm is used for polishing, 5~10 μm to 12~22 μm is used for grinding, and 20~30 μm is used for coarse grinding. Diamond powder is mainly used in the following four aspects: (1) Direct use to make abrasive paste. It is widely used in the polishing of cutting

ISO SGS 10-20 Micron diamond lapping powder for cemented carbide parts Description: Diamond powder is mainly used for fine grinding, grinding and polishing of non-metallic hard and brittle materials. Generally, 0~0.5 μm to 6~12 μm is used for polishing, 5~10 μm to 12~22 μm is used for grinding, and 20~30 μm is used for coarse grinding. Diamond powder is mainly used in the following four aspects: (1) Direct use to make abrasive paste. It is widely used in the polishing of

Sintering PCD Artificial Micron Diamond Powder 0-0.5um Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be high, so that

0-0.25um HID B Synthetic diamond powder wear resistant Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be high, so that

High Purity 10-14um HID PCD Micron Diamond Powder Single Crystalline Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be

OEM ODM Blocky Metal Bond Diamond Powder​ For Polishing Gemstones Description: This diamond powder has unique advantage: the raw material of diamond abrasive powder usually is JR1 diamond, but we choose Jr2 and Jr3 diamond as raw material for this product, the toughness is much higher than that of normal diamond powders. We have our own unique milling technology, which can well control the single size output ratio and particle morphology so as to ensure that we can well

20-30um HID Cu Copper Coated Diamond Powder Multicrystalline Description: Diamond micron powder is mainly used for fine grinding, grinding and polishing of non-metallic hard and brittle materials. Generally, 0~0.5 μm to 6~12 μm is used for polishing, 5~10 μm to 12~22 μm is used for grinding, and 20~30 μm is used for coarse grinding. Diamond powder is mainly used in the following four aspects: (1) Direct use to make abrasive paste. It is widely used in the polishing of cutting

8-16um Gray Red friable Micron Diamond Powder Copper Coated Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be high, so

1-2um Crush Resistant Resin Bond Diamond Powder Quasi polycrystalline Description: The grinding ability of diamond is 1.25 times larger than cubic boron nitride, 2.85 to 3.57 times larger than silicon carbide, and 6.25 to 7.14 times larger than white corundum. Therefore, as a kind of super-hard abrasive, diamond powder has incomparably superior grinding ability, and it has been paid more and more attention by developed countries in various industries. The grinding ability of

0-2um Detonation Polycrystalline Diamond Powder For Semiconductor Wafer Description: Polycrystalline diamond micropowder is made of graphite using a unique directional blasting method. The shock wave of the directional blasting of high-speed explosives accelerates the flight of metal flying pieces and hits the graphite pieces to cause the graphite to be converted into polycrystalline diamond. Its structure is very similar to natural diamond, which is formed by the combination

Surface Treatment 10-20um Diamond Polishing Powder narrow PSD Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be high,

30-40um Dark Grey Diamond Grit Powder 0.5% Ti Coated Description: Synthetic diamond powder is mainly used in grinding and polishing processes. Users often require the lowest diamond concentration and the fastest cutting speed to obtain the best surface roughness and surface quality of the workpiece. To achieve such a high use effect, high-quality micropowder should be controlled from the following aspects: (1) The strength of the diamond raw material should be high, so that

MBD Round Monocrystalline Micron Diamond Powder For Grinding Description: Raw material is high grade MBD series of high quality diamond, the shape is almost spherical or round, strictly narrow particle size distribution, tiny impurities (inner and outer); better dispersion and high wear-resistence, easy to disperse to various types of vector and combined with various binders solidly. Recommended Applications: Suitable for precision grinding of optical products, precision

Resin Bond BRM Micron Diamond Powder For Grinding Wheel Description: Super-hard abrasive powders are widely used in the manufacture of fine grinding, grinding, polishing, fine polishing and super-polishing grinding wheels, grinding pastes, abrasives, or as loose abrasives. Our company is the main domestic manufacturer of high-quality polycrystalline diamond powder, cubic boron nitride powder and single crystal diamond powder. As an expert in the production of super-hard

High Precision 2-4 to 36-54 Micron Diamond Powder For Lapping Ceramic Description: A special surface treatment process is adopted to cause a chemical reaction on the surface of the original particles, increase the surface roughness of the diamond particles, and enhance the holding force between the diamond particles and the bonding agent. Improve the self-sharpening and cutting force of the original diamond. And in the cutting and polishing process, it can effectively avoid

HID PD Ultra Detonated Polycrystalline Diamond Powder for polishing Description: Industrial synthetic diamond powder is a new type of super-hard abrasive, which is mainly used for manufacturing tools used in the process of processing high-hardness and high-precision articles in industrial production. Currently, it is generally used for polishing from w0-0.5 to w6-12. W15-10 to w22-36 for grinding; W12-22 coarse for fine grinding. It has the following important features: -

HID PCD PDC Micron Diamond Powder 1-2um to 50-60um Description: Industrial diamond powder has the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has high hardness and good wear resistance, and can be widely used for cutting, grinding and drilling. Diamond abrasive powder has high thermal