Pneumatic Accessories Stainless Steel SS316 Flat Silencer

Sintered Mufflers could be used with air powered tools, valves, and cylinders to reduce noise and filtering exhaust fumes.
For purpose of reduce noise, filtration, and flow ratings , please selecting mufflers, breather vents, and filters in below ways:
Noise Measured in decibels (dB), the rating indicates how much Sintered Mufflers reduces exhaust noise from your tool or equipment.
Usually recommends hearing protection for exposure higher than 80 dB.

Filtration: Sintered Mufflers trap particles to clean the air exhausting to the environment or going into your equipment.
The size of particles is measured in microns; the lower the number of microns, the smaller the particles that are removed from the air.
Flow-Measured in standard cubic meter per minute, this rating is the maximum air flow that a product can withstand.
Please Note to choose the correct pipe size, measure the threaded inside diameter (ID) or outside diameter (OD) of your pipe or valve,
usually DALON can offer Sintered Mufflers types in standard threading from 1/8 to 1 1/2 inch.
Sintered Mufflers with pipe connections thread into NPT or metric threaded exhaust ports.

Material: stainless steel

Effect: muffler with an exhaust port connected, for reducing noise emissions,

Medium: compressed air.

Use pressure: 0.1-0.8Mpa,

Operating temperature: -30 ~ + 350 C

Muffler Features:
1. Silencing effect is very advantageous.

2. Exhaust resistance is small, the action has no effect on the machine.

3. Dimensions compact, light weight, easy to install.

4. Long life, corrosion-resistant stainless steel muffler filter, water, oil.

5. Oil blockage can also wash before use.