High Accuracy Process Trace Oxygen Nitrogen Analyzer Tester

Applications

Air separation, Gases production, Protection gas for semi-conductors industry, Wave soldering & reflow soldering, Food production, Petro-chemical, and other oxygen purity detection in inert and hydrocarbon gas mixtures.

CI-PC96 Process Trace Oxygen Analyzer Oxygen Tester

Technical Specifications

1. Model: CI-PC96
2. Measure Range: 0-10/100/1000ppm, 1% O₂
3. Principle: Electrochemical
4. Measure Mode: Online
5. Install: Dial mounted
6. Application: Non dangerous general applications
7. Sensitivity: 0.5% F.S.
8. Measure Accuracy: ≤±5% @ 0-10ppm ; ≤±3% @ 0-100ppm; ≤±2% @0-1000ppm
9. Stability: ≤±2.5% @ 0-10ppm; ≤±1.5% @ 0-100ppm; ≤±1% @ 0-1000ppm
10. Response Time: T90<60s under 25℃
11. Sample Gas Temperature: 0-45℃
12. Sample Gas Flow: 1.2L/min
13. Sample Gas Pressure: 35-210KPa
14. Power Supply: AC85~265, consumption lower than 20VA
15. Signal Output: 4-20mA DC isolated, with 0-100mV, 0-1V and 0-10V to switch
16. Alarms: 2 way SPST alarm
17. Alarm Contact Capacity: 0.2A under AC240V
18. Display Resolution: 0.01%@%; 1ppm@100-10000ppm; 0.1ppm@10-100ppm; 0.01ppm@0-10ppm
19. Communication: RS232 standard (RS485 optional)
20. Analyzer Size: 144 (W)×144 (H)×190 (D) mm

Features

• 240×128 LCD display oxygen concentration and other settings;
• Isolated 4-20mA signal output, with 0-100mV, 0-1V and 0-10V as options;
• Easy to replace sensor;
• Standard RS232 two-way communication port;
• Two way SPST alarms;
• Over pressure protection function and over purity range protection function;
• Automatic data storage in a certain interval time, and browsing data at any time