Az80 Mg Ribbon Sacrificial Anode Cathodic Protection G97 In Fresh Water
Easy Bend Magnesium Ribbon Sacrificial Anode For Cathodic Protection
Introduction:
From raw materials - semi-continuous magnesium alloy rods - extrusion - forming, the factory is self-produced and the internal composition is controllable. Extruded ribbon magnesium anode, very flexible. Due to the higher area-to-weight ratio of magnesium ribbons, it can provide higher current output than other anodes.
Specification:
|
Section (inch) |
3/8 x 3/4 + 0.015(1/8" corner) |
|
|
Diameter of core (inch) |
0.135 |
|
|
Core eccentric (inch) |
<1/16 |
|
|
Weight (lbs/feet) |
0.243 |
|
|
Standard coil length (feet) |
1000 |
|
|
Coil weight (lbs) |
243 (110kgs) |
|
Chemical composition %:
| Mg | Mn | Zn | Al | Cu | Ni | Fe | Si | Impurities | |
| (max) | (max) | (max) | (max) | (max) | each | total | |||
| Balance | 0.50-1.3 | / | 0.01 | 0.02 | 0.001 | 0.03 | / | 0.05 | 0.3 |
| Balance | 0.20min | 0.7-1.3 | 2.5-3.5 | 0.01 | 0.001 | 0.002 | 0.02 | 0.05 | 0.3 |
The electrochemical performance of :
|
Open voltage (-V) |
Closed voltage (-V) |
Actual capacity (A.h/kg) |
Efficiency (%) |
| 1.50-1.55 | 1.45-1.50 | 1230min |
55min |
Application:
It is used for high resistivity environment, protection of pipelines in casings, temporary cathodic protection of pipelines, protection of storage tanks and pipeline networks, grounding grids against strong electrical interference, etc.
Magnesium tape is mainly suitable for being coiled by a protective body to protect oil tanks or other steel structures in high-resistivity electrolytes, or surfaces with narrow construction spaces, and high-resistivity soils, fresh water and other media.
Photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.