ASTM Magnesium Ribbon Anode Magnesium Aluminum Alloy Strip Oem
Simple Operation Magnesium Ribbon Anode Applied For Cathodic Protection Of Special Parts
Introduction:
Due to the higher area-to-weight ratio of the magnesium ribbon, it can provide higher current output than other anodes. From raw materials - semi-continuous magnesium alloy rods - extrusion - forming, the factory is independently produced and the internal composition is controllable.
1) The length is adjustable and easy to bend;
2) Has a larger area-to-mass ratio;
3) It is convenient for construction and installation in narrow spaces;
4) Small footprint and low engineering cost;
5) Suitable for high resistivity environment.
Specification:
|
Section (inch) |
3/8 x 3/4 + 0.015(1/8" corner) |
|
|
Diameter of core (inch) |
0.135 |
|
|
Core eccentric (inch) |
<1/16 |
|
|
Weight (lbs/feet) |
0.243 |
|
|
Standard coil length (feet) |
1000 |
|
|
Coil weight (lbs) |
243 (110kgs) |
|
Chemical composition %:
| Mg | Mn | Zn | Al | Cu | Ni | Fe | Si | Impurities | |
| (max) | (max) | (max) | (max) | (max) | each | total | |||
| Balance | 0.50-1.3 | / | 0.01 | 0.02 | 0.001 | 0.03 | / | 0.05 | 0.3 |
| Balance | 0.20min | 0.7-1.3 | 2.5-3.5 | 0.01 | 0.001 | 0.002 | 0.02 | 0.05 | 0.3 |
Application:
Magnesium Ribbon Anode is used in high resistivity environments, protection of pipelines in casings, temporary cathodic protection of pipelines, protection of storage tanks and pipe networks, grounding grids to prevent strong electrical interference, etc.
Photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.