Small Area Magnesium Ribbon Anode 0.135 Inch Magnesium Metal Strips
Small Floor Area Magnesium Ribbon Anode Used For Cathodic Protection
Introduction:
In the case of using steel pipelines, the method of local cathodic protection is generally used for corrosion protection of pipelines. The specific practice in the design process is to wrap magnesium anode strips or zinc anode strips or install bracelet anodes on the main pipe in the casing, and local cathodic protection with wound magnesium anode strips is generally recommended.
Features:
1) Adjustable length and easy to bend;
2) Has a larger area-to-mass ratio;
3) Convenient construction and installation in narrow spaces;
4) Small floor area and low engineering cost;
5) Suitable for high resistivity environment.
Chemical composition %:
| Mg | Mn | Zn | Al | Cu | Ni | Fe | Si | Impurities | |
| (max) | (max) | (max) | (max) | (max) | each | total | |||
| Balance | 0.50-1.3 | / | 0.01 | 0.02 | 0.001 | 0.03 | / | 0.05 | 0.3 |
| Balance | 0.20min | 0.7-1.3 | 2.5-3.5 | 0.01 | 0.001 | 0.002 | 0.02 | 0.05 | 0.3 |
Specification:
|
Section (inch) |
3/8 x 3/4 + 0.015(1/8" corner) |
|
|
Diameter of core (inch) |
0.135 |
|
|
Core eccentric (inch) |
<1/16 |
|
|
Weight (lbs/feet) |
0.243 |
|
|
Standard coil length (feet) |
1000 |
|
|
Coil weight (lbs) |
243 (110kgs) |
|
Application:
Magnesium tape is mainly suitable for being coiled by a protective body to protect oil tanks or other steel structures in high-resistivity electrolytes, or surfaces with narrow construction spaces, and high-resistivity soils, fresh water and other media.
Photos:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.