D Shape Anti Corrosion Anode V1.62 Fresh Water Anode Mag OEM

Current Efficiency 55% Mg - Mn Sacrificial Anodes For Cathodic Protection
 
Introduction:
 
Mg-Mn sacrificial anodes are common binary high-potential alloys, in which Mn element in the alloy can make the second phase distribution uniform, promote grain refinement, and improve its electrochemical performance. Mg-Mn alloy with low Mn content, the influence of Mn content on its microstructure and electrochemical properties was analyzed, the appropriate amount of Mn added (0.08%~0.4%) was determined, and impurities in the Mg-Mn sacrificial anode were found. Elements can cause large solute segregation and obvious grain size differences, so reducing impurity elements is the preferred method for performance improvement.

The potential of the high-potential magnesium anode is -1.75V CSE, and the driving voltage is 0.85V; the potential of the low-potential magnesium anode is -1.55V CSE, and the driving voltage is 0.7V. The use temperature can reach 100℃. When the remaining amount of the sacrificial anode is 15% of the initial weight, it is considered that the anode fails, so the usage rate of the anode is generally 85%.
 
Chemical composition %:

 
The electrochemical performance of:
 

Advantages:

A: The one-time investment cost is low, and basically no maintenance cost is required during operation
B: The utilization rate of the protection current is high, and no over-protection occurs
C: No interference to adjacent underground metal facilities, suitable for long-distance pipelines without power supply, and small-scale decentralized pipeline protection
D: It has the functions of grounding and protection
E: The construction technology is simple, and no special professional maintenance management is usually required.

Application:

Such high potential anodes are recommended to be used in the case where the electric resistivity of the soil is higher than 2000cm.

Applicable to anti-corrosion protection of the oil, gas, water supply and drainage pipelines, as well as the protection of harbor, ship, reservoir, gate, and other projects in the water.

Photos:

FAQ:
 
Q : Can I add my logo on the boxes/cartons?
A : Yes,OEM and ODM are available from us.
 
Q : What are the benefits of being a distributor ?
A : Special discount Marketing protection.
 
Q : How does your factory control the quality of your products?
A : 100% self-inspection before packing. Quality is the life of our factory, first, each raw materials, come to our factory, we will test it first, if qualified, we will process the manufacturing with this raw materials, if not, we will return it to our supplier, and after each manufacturing step, we will test it, and then all the manufacturing process finished, we will do the final test before the commodities left our factory.
 
Q : Can we mix items in one 20ft container?
A : Yes.
 
Q : Can I have a visit to your factory before the order?
A : Sure,welcome your visit of factory.
 
Q : What are the necessary parameters to get the accurate quote?
A : Material chemical composition, anode size, cable and other accessaries information.