Inactivated Viral Transport Medium Kit Non Inactivated Type For RT-PCR

Inactivated Viral Transport Medium Kit & Non Inactivated Type Viral Transport Medium For RT-PCR

Inactivated Viral Transport Medium Kit

The Viral Transport Medium is intended for the collection and transport of clinical samples containing viruses, chlamydiae, mycoplasmas and ureaplasmas from the collection site to the testing laboratory.

Viral Transport Medium (Non-inactivated Type) 

The Viral Transport Medium is intended for the collection and transport of clinical samples containing viruses, chlamydiae, mycoplasmas and ureaplasmas from the collection site to the testing laboratory.

PRODUCT FEATURES - Inactivated Viral Transport Medium Kit

Directly lyse the virus and release nucleic acid

Suitable for RT-PCR

Quickly inactivate the virus

Eliminate the risk of infection

PRODUCT FEATURES - Viral Transport Medium (Non-inactivated Type)

Maintain the viability of the organisms

Maintain the originality of the organisms to the greatest extent

Anti-bacterial and anti-fungal

[Preservation]

Storage: 5-25℃ Expiration date: 12 months
Please refer to the outer box for the production date and expiration date.

[Sample Requirements]
The collected nasopharyngeal swab samples should be transported at 2°C-8°C and submitted for inspection immediately. Sample transport and storage time should be no later than 48h.

[Testing method]  

1. Before sampling, mark the relevant sample information on the label of the sampling tube.
2. Use a sampling swab to sample at the nasopharynx up to different sampling requirements.
3. Sampling methods are below:
a. Nasal swab: Gently insert the swab head into the nasal condyle of the nasal passage, stay for a while and then slowly turn it out. Wipe the other nostril with another swab, immerse the swab head in the sampling solution, and discard the tail.
b. Pharyngeal swab: Wipe the bilateral pharyngeal tonsils and posterior pharyngeal wall with the swab, immerse the swab head in the sampling solution, and discard the tail.
4. Quickly place the swab into the sampling tube.
5. Break the sampling swab above the sampling tube, and tighten the tube cap.
6. Freshly collected clinical specimens should be delivered to the laboratory within 2 hours at 2°C-8°C.

[Interpretation of results]

If the collected sampling solution turns yellow or turbid, the sample should be re-sampled for testing.

[Method limitations]

1. Contaminated samples after collection will affect the final results.

2. Store samples at inappropriate temperature will affect the final results.

Advantages: