Huayin Plastic Pyrolysis Oil Plant To Fuel Oil Plastic Pyrolysis Reactor

Plastic Pyrolysis Reactor Latest Design For Plastic Pyrolysis To Fuel Oil Plant

Product description

With the rapid development of the plastics industry, the application of plastic products is becoming more and more extensive, but because plastics are not easy to rot and degrade, this seriously affects the ecological environment of the earth. The waste plastic pyrolysis refining equipment is not only pollution-free to the environment, but also can recover energy effectively.

Specification

Operation Process

1: Feeding. Feed tires into reactor manually or with auto feeder;

2: Preheating. Waste tyres will be melted under high temperatures and oil gas comes out.

3: Oil-producing. Oil gas goes through the cooling system and is cooled down into liquid fuel oil; Some oil gas that can not be turned into liquid oil will go back to the heating furnace for second burning.　

4: Cooling. After the oil processing is finished, leave the plant for cooling.

5: Carbon black discharging.

6: Pulling out steel wire.

Main features

1) Industrial batch type, different capacity from 1ton to 15ton per batch.

2) low consumption, high oil yield, and quality, continuous and steady operation of production.

3) Horizontal rotating reactor enables the waste material equally heated and completely pyrolyzed to achieve high production efficiency.

4) Anti-coking device, alarm, auto pressure releasing device, anti backfire device, vacuum pump to ensure operation safe and reliable.

5) Combustible Gas recycling utilization technology, the combustible gas can be used for heating, remaining heat can be fully utilized, realized self-supply for pyrolysis process, dramatically minimizing running cost.

6) Adopt 3 layers of ceramic packing dedusting device and water spray, finally, no black smoke discharged out. SGS emission report provided.

7) Support PLC system to achieve high automation production and ensure operation under safety conditions.

8) Low requirement for manpower and clean production.

Installation sites

Our services

The engineer will be sent to your place to Guide Installation, Test running, and Training of workers.

Besides, Installation preparation manuals will be sent to you so that you can do relevant preparation work before our engineer arrives.

3D drawing, layout drawing, and foundation drawing will be provided based on your land size and other specific requirements.