Diameter 20mm TZM Titanium Zirconium Molybdenum Alloy Bar Tzm Alloy Rod Tzm Metal Rod Molybdenum Alloy Rod Dia15mm 20mm
Titanium Zirconium Molybdenum Alloy Bar Diameter 20mm
1.The Titanium Zirconium Molybdenum Alloy Bar Diameter 20mm is described as follows:
Black surface, alkali washing, automobile polishing, and grinding for bars.
Titanium Zirconium Molybdenum Alloy Bar Requirements: Oxide coating and mild forging hammer marks are permitted on the surface of the forged molybdenum bar. The polished molybdenum bar's surface has a metallic sheen and no discernible oxidation.There should be no delamination, cracks, burrs and other surfaces on both surfaces. Longitudinal cracks and other defects.
2. Tolerances for Diameter and Out-Of-Roundness of Titanium Zirconium Molybdenum Alloy Bar Dia.20mm:
| Diameter inches(mm) | Tolerance in inches (mm) | ||
| Diameter | Out of Roundness | ||
| + | - | ||
| 0.020~1/16 (0.51~1.59) | 0.001(0.02) | 0.001(0.02) | 0.001(0.02) |
| ≥1/16~9/32 (1.59~7.14) | 0.002(0.05) | 0.002(0.05) | 0.004(0.10) |
| ≥9/32~13/32 (7.14~10.32) | 0.010(0.25) | 0.005(0.13) | 0.008(0.20) |
| ≥13/32~5/8 (10.32~15.9) | 0.010(0.25) | 0.005(0.13) | 0.012(0.30) |
| ≥5/8~7/8 (15.9~22.2) | 0.015(0.38) | 0.005(0.13) | 0.015(0.38) |
| ≥7/8~1 (22.2~25.4) | 0.020(0.51) | 0.005(0.13) | 0.015(0.38) |
| ≥1~11/8 (25.4~34.9) | 0.020(0.51) | 0.010(0.25) | 0.018(0.46) |
| ≥11/8~3/2 (34.9~38.1) | 0.020(0.51) | 0.015(0.38) | 0.020(0.51) |
| ≥3/2~13/8 (38.1~41.3) | 0.025(0.64) | 0.015(0.38) | 0.020(0.51) |
| ≥13/8~2 (41.3~50.8) | 0.030(0.76) | 0.020(0.51) | 0.025(0.64) |
| ≥2~5/2 (50.8~63.5) | 0.032(0.81) | 0.032(0.81) | 0.025(0.64) |
| ≥5/2~13/4(63.5~82.6) | 0.032(0.81) | 0.032(0.81) | 0.027(0.69) |
| ≥13/4~7/2 (82.6~88.9) | 0.045(1.14) | 0.045(1.14) | 0.040(1.02) |
3. Mechanical behavior of Titanium Zirconium Molybdenum Alloy Bar Dia.20mm:
| Grade | Condition | Dia. Inches(mm) | Tensile strength min. Mpa | Yield Strength min. Mpa | Elongation % |
| TZM |
SR (Stress relief) |
3/16~7/8 (4.76~22.2) | 790 | 690 | 18 |
| ≥7/8~9/8 (22.2~28.6) | 760 | 655 | 15 | ||
| ≥9/8~15/8 (28.6~47.6) | 690 | 585 | 10 | ||
| ≥15/8~23/8 (47.6~73.0) | 620 | 550 | 10 | ||
| ≥23/8~7/2 (73.0~88.9) | 585 | 515 | 5 |
4. Classification of Titanium Zirconium Molybdenum Alloy Bar Dia.20mm:
TZM molybdenum alloy rod can be divided into the following types according to the degree of processing:
Sintered TZM alloy rod: The sintered TZM rod is a rod without subsequent processing, and the surface is gray-black without metallic luster.
Forged TZM alloy rod: After forging, the TZM rod will have a layer of oxide on the surface, and the surface will show a black metal-free color.
Polished TZM alloy rod: The TZM rod can be polished one or more times according to the surface state and quality requirements, and the surface of the polished TZM rod is silver-gray metallic luster.
Polishing TZM alloy rods: Polishing TZM rods refers to polishing the rods to reduce the surface roughness of the alloy rods, thereby obtaining bright and flat TZM rods.
Alkali-washed TZM alloy rods: Alkali-washed TZM rods are obtained through the alkali-washing process. The surface of the alkali-washed TZM rods has a gray metallic luster and is relatively smooth.
Do you want to know more about our products?
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.