RFID Labeling Packaging Hot Melt Adhesive TPR Bonding TPR-2002A
Custom new arrival Yellow Solid Block Hot Melt Adhesives for RFID (Radio Frequency Identification) Label
TPR-2002A
Wanli® pressure sensitive hot melt adhesive TPR-2002A for RFID label is a TPR (Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-2002A is specifically developed for RFID label and adhesive tape. TPR-2002A is featured high viscosity, high peeling strength, good aging resistance.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-2002A is used for RFID(radio frequency identification) label and adhesive tape.
| Application Material | RFID (Radio Frequency Identification) Label |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | RFID(Radio Frequency Identification) Label |
| Solid Content | 100% |
| Operating Temperature | 160～180 ℃ |
| Softening Temperature | About 110 ℃ |
| Melt Viscosity | About 5000 mpa·s (180℃) |
| Ring Initial Viscosity |
About 30N/2.5cm/ Stainless Steel Plate (Measured at 23 ℃ and 45g/ m2 on PET) |
| Peeling @180˚ | About 25.0N/2.5cm/ Stainless Steel Plate |
| Curing | Normal Temperature Curing |
| Usage Scope | RFID(Radio Frequency Identification) Label and Adhesive Tape |
| Shelf Life | 1 Year |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Rare aging resistance.
USER GUIDE
TPR-2002A is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 160℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-2002A where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.