Black Yellow Hot Melt Pressure Sensitive Adhesives Seal Bonding Epoxy TPR-433
Low Cost Factory Direct Supply WANLI® Pressure Sensitive Hot Melt Adhesive TPR-433 White 100% Solid for Waybill & Waybill Seal Bonding Application
Wanli® pressure sensitive hot melt adhesive TPR-433 for waybill is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-433 is specifically developed for waybill label and waybill seal bonding. TPR-433 is featured high viscosity, high peeling strength, good aging resistance. Suitable working on standard machine systems such as slit squeegee, roller glue, spray glue etc.
APPLICATION
Wanli® pressure sensitive hot melt adhesive TPR-433 is used for waybill label and waybill seal bonding.
| Application Material | Waybill & Waybill Seal Bonding |
| Appearance | Yellow Block |
| Component | TPR |
| Application Industry | Waybill Label & Waybill Seal Bonding |
| Solid Content | 100% |
| Operating Temperature | 150℃～180℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature | Around 99 ℃ |
| Melt Viscosity | Around 10000mpa·s (160℃) |
| Ball Initial Viscosity | Around 10# (Measured at 23 ℃ and 35g/ m2 on PET) |
| Peeling @180˚ | Around 15.0N/2.5cm/ Stainless Steel Plate |
| Usage Scope | Waybill Label & Waybill Seal |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
High viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-433 is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store the product where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.