150-180 Degree Hot Melt Packaging Tape TPR Hot Melt PSA TPR-6258C
Good Quality Factory Directly Viscosity About 11000mpa·s (160℃) Yellow Block WANLI® TPR-6258C Pressure Sensitive Hot Melt Adhesive for Fiberglass Adhesive Tape & Ton Pack Adhesive Tape Production Application
Wanli® pressure sensitive hot melt adhesive TPR-6258C for adhesive tape is a TPR(Thermoplastic Rubber) synthetic rubber based hot melt adhesive. TPR-6258C is specifically developed for fiberglass adhesive tape and ton pack adhesive tape. TPR-6258C is featured high viscosity, high peeling strength, perfect aging resistance.
APPLICATION
Wanli® PSA pressure sensitive hot melt adhesive TPR-6258C is used for fiberglass adhesive tape and ton pack adhesive tape.
| Application Material | Adhesive Tape |
| Appearance | Yellow Solid Block |
| Component | TPR |
| Application Industry | Adhesive Tape |
| Solid Content | 100% |
| Operating Temperature | 150～180 ℃( Depend On Machine, Substrate, Environment And Other Conditions) |
| Softening Temperature | About 92℃ |
| Melt Viscosity | About 11000mpa·s (160℃) |
| Ball Initial Viscosity | About 10#/45μm |
| Peeling @180˚ | About 30.0N/2.5cm/45μm on Stainless Steel Plate |
| Lasting Adhesive | ≥72H |
| Usage Scope | Fiberglass Adhesive Tape and Ton Pack Adhesive Tape |
| Shelf Life | 12 Months |
| Package | 20Kg/Carton |
FEATURE
Very good viscosity.
High peeling strength.
Good aging resistance.
USER GUIDE
TPR-6258C is suitable for standard hot melt adhesive application equipment such as slit squeegee, roll glue etc.
The recommended operating temperature is 150℃~180℃, which depends on the equipment, substrate and environment and other conditions.
STORAGE
Store TPR-6258C where it’s dry, cool and avoid direct sunlight. The storage temperature should be no more than 35℃ and avoid open fire or heat source.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.