MOX4 MOX-4 AA829-M20 Oxygen Gas Sensor for Medical Equipment with 0-1500 mBar Range and <15s Response Time
The MOX4 MOX-4 AA829-M20 is a high-performance oxygen gas sensor designed for medical equipment applications. Constructed with white ABS housing and battery operation, this sensor provides reliable oxygen monitoring in critical healthcare environments.
- Partial pressure electrochemical operating principle
- Wide measurement range from 0 mBar to 1500 mBar O2
- Fast response time under 15 seconds (air to 100% O2)
- Linear output from 0% to 100% O2 concentration
- Designed for harsh environmental conditions
- White ABS construction for medical equipment compatibility
| Parameter | Specification |
|---|---|
| Operating Principle | Partial pressure electrochemical |
| Output Signal | 9 mV to 13 mV in 210 mBar O2 |
| Measurement Range | 0 mBar to 1500 mBar O2 |
| Response Time (T90) | <15 seconds (air to 100% O2) |
| Baseline Offset | <200 μV |
| Linearity | Linear 0% to 100% O2 |
This oxygen sensor is specifically designed for monitoring partial pressure of oxygen in:
- Anesthesia equipment (excluding xenon)
- Critical care monitoring systems
- Neonatal incubators
- General oxygen monitoring devices
Performance data valid at 20°C, 50% RH and 1013 mBar for 3 months from sensor manufacture date. Output signal may drift below lower limits over time.
Avoid exposure to high concentrations of solvent vapors during storage, installation, and operation. When using with PCBs, apply degreasing agents before sensor installation. Do not apply glue directly on or near the sensor element.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.