Front End Bucket Wheel Loader Machine Air Brake 3900kg Operating Weight
Front End With Bucket Wheel Loader Machine Air Brake
1. Products Description of MCLLROY Wheel Loader
In general, for construction machinery, the four most important factors are: price, quality, operation, and after-sales.
The amount of shovel material and the stability of the loader depend on the cooperation of the loader frame.
The flexibility and light operation mainly depends on the hydraulic system of the loader.
The low failure rate depends on quality as well as the after-sales service.
MCLLROY wheel Loaders are widely used in the construction, municipal engineering, urban and rural gardens, lime, sand, cement factories, mines and other enterprises and institutions and departments. It is particularity applied to the narrow space for the loading operation of stone,sand and other construction materials.
2. Specification of MCLLROY Wheel Loader
| MSL932/ZL932 | Metric Units |
| Engine Model | Changfa 490 Supercharged /Yun Nei 490 Supercharged |
| RPM | 2400 |
| Rated Power | 60 kW |
| Emissions | EU Stage II |
| Operating Weight | 3900 kg |
| Load Capacities | 1500-2000 kg |
| Bucket Capacities | 1.0 m³ |
| Max. Travel Speed | 38 km/h |
| Gear Box | CVT 265 torque converter |
| Axle | Small hub reductro |
| Axle Base | 2400 mm |
| Brake | Air Brake |
| Hydraulic Cycle time - lift | ≤ 8 s |
3.Details and advantages of MCLLROY Wheel Loader
The EXT automatic inflating system provides operator a freely inflation job.
The fuel tank is equipped with loose-leaf , easily accessible service points make daily checks fast and effective.
Service brake control adopts the double-booster pump air over caliper disc brake, which has the characteristics of great brake power, convenient dismantling, safety and reliability.
4.Production lines of MCLLROY Wheel Loader
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Steel plate cutting:
The cutting of the steel plate is closely related to the drawing design, workers' technique and cutting equipment.
Normally there are three types of cutting machines, you can see from the pictures here.
Flame cutting is used for iron plates over 40mm thick.
While plasma cutting is for steel plate that in between 20-40mm.
Laser cutting is for steel plate between 8-20mm.
It is great for cutting that requires high precision. For example, cutting steel components for bumper, hood, and driver's cab. The advantages of laser cutting are: low temperature, so the plate is not likely deformed; the disadvantage is that it consumes a lot of power.
When the steel sheet is uneven or the cutting speed is not steady, a melting point or break-point will form; so during the cutting process, workers need to go back and forth to check.
WZQ Issued
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.