Industrial Small Wheel Loaders , Front End Shovel Loader With 3500mm Dump 1.2m3 Bucket

Price Negotiable

Price: $ 4000-6000 /Unit

MOQ: 1 Set

Delivery Time: 5-8 working days

Brand: MCLLROY

Product Description

Front End Shovel 2.5 Ton Wheel Loader 3500mm Max.Dump Clearance

1. Products Description

In general, for construction machinery, the four most important factors are: price, quality, operation, and after-sales.

The amount of shovel material and the stability of the loader depend on the cooperation of the loader frame.

The flexibility and light operation mainly depends on the hydraulic system of the loader.

The low failure rate depends on quality as well as the after-sales service.

MCLLROY wheel Loaders are widely used in the construction, municipal engineering, urban and rural gardens, lime, sand, cement factories, mines and other enterprises and institutions and departments. It is particularity applied to the narrow space for the loading operation of stone,sand and other construction materials.

2. Specification

MCL 940
Engine Model	Yun Nei 4102 Supercharged
RPM	2400
Rated Power	76 kW
Emissions	EU Stage II
Operating Weight	6100 kg
Rated Load	2800 kg
Bucket Capacities	1.2 m³
Max. Travel Speed	28 km/h
Gear Box	CVT 280 torque converter
Alex	Large hub
Axle Base	2560 mm
Brake	Air Brake

3. Details and Advantages

The main components of the loader are used brand-name manufacturer's products, interchangeability of good, reliable, well-resourced parts.

1) Tire:A variety of patterns to adapt to different perorations ,solid tires available.

2) Frame:Strong hinge joint.

3) Cab:

I. Electronic oil level indicator.

II. Comfortable seat with safety belt.

III. Intelligent instrument.

IV. Pilot valve hydraulic operation.

4) Wide-opening hood for easier servicing & maintenance of engine.

5) MCLLROY design engine cover,automatic power-off electronic flame-out ,no knife.

4. Inspection

The inspection is as important as any other procedure. MCLLROY technicians usually need to inspect the followings (Part I):

1) Adjust the tire pressure, drive the loader to the inspection platform, to see if the bucket is level to the ground when it is on the ground.

2) Check if the hydraulic oil is enough, and then lift the arm, withdraw the bucket and check the hydraulic oil level again, check the hydraulic oil tank scale (scale at 11 to 13 means enough)

3) Check if any bolts are loose or missing, and if there is a oil leaking problem.

4) Check the track width to see if it is different from standard.