11 In 1 Oxygen Jet Facial Machine , Hydra Beauty Machine 300W 100Kpa Vacuum
2022 Professional High-Concentrated 11 In 1 Multifunction Oxygen Jet Facial Cleaning Hydra Beauty Machine
2022 newest Skin Care Machine Multi-Functional Skin
The principle of space photo-oxygen
1: The normal air composition is calculated by volume fraction: nitrogen accounts for about 78%, oxygen accounts for about 21%, rare gas accounts for about 0.939%, carbon dioxide accounts for about 0.031%, and other gases and impurities account for about 0.03%. Using molecular sieve physical adsorption and desorption technology for air separation, molecular sieve can adsorb nitrogen in the air when pressurized, and the remaining externally absorbed oxygen is collected. After purification, it becomes high-purity oxygen. The space photo-oxygen mask acts on the face, and with the cooperation of LED cold light, the facial muscles can fully absorb oxygen and skin care product essence.
2: The skin has sufficient oxygen to have smooth and smooth keratin. The skin cells are repaired and grown by oxygen, which makes the metabolism regular, eliminates bacteria, accelerates blood circulation, discharges toxins, and makes the skin rosy and elastic.
| Vacuum | 100Kpa |
| Power | 300W |
| Max output | 250VA |
| Ultrasonic | 1 MHz |
| Screen | 10.2inch Touch screen |
| Handle | Hydrodermabrasion with 8 tips; Hydrodermabrasion with diamond tips |
| Spray mist gun 1piece; BIO 1 piece; Oxygen injector 1 piece; | |
| Ultrasonic handle1 piece; Skin scrubber 1 piece; PDT 1piece | |
| Voltage | 110V/220V, 50Hz/60Hz |
| Package Size | 117cm*65cm*64cm |
How to operate the space photo-oxygen mask
1. Choose the right light according to the nursing area. Red photons activate blood and nourish the skin, and blue photons whiten and reduce inflammation.
2. It is recommended to adjust the mode to "P5" constant light to avoid the discomfort caused by pulsed light to customers.
3. The intensity of light is adjusted according to customer feedback.
4. Place the mask on the customer's head for oxygen inhalation. The oxygen concentration is adjusted at the back of the device according to the customer's needs, generally between 3-4, and can be adjusted to between 5-6 if the blood is insufficient. (20min-30min)
The high-pressure pulsating pure oxygen is delivered to the skin epidermis, allowing the skin to absorb pure oxygen and slight oxygen vibration while absorbing the product.
Precautions:
Avoid the client's inflamed and damaged areas. Do not use cream or solid products to avoid blocking the oxygen port.
Oxygen injection method
1. Apply enough medium (gel, product) to the treatment area.
2. According to customer feedback, select the appropriate frequency through the screen buttons and flow control valve.
3. Pat the handle close to the skin during operation, and use the lifting technique to act on the nursing part.
4. Nursing time: face 15min-20min; eye 10min-25min
Ordinary face washing can only clean the surface of the skin, and there will still be melanin residues. The keratin generated by skin metabolism is also very stubborn, and it is difficult to completely remove it by ordinary methods. Over time, the skin becomes rough and the pores are blocked. It is difficult for lotion and beauty ingredients to penetrate into the base. . The sonic cleaning system uses high-frequency vibration to instantly atomize the water, and the atomized water removes the dirt, so as to achieve the effect of exfoliating, dead skin, acne, and blackheads.
radio frequency
Radio frequency radio waves penetrate deep into the skin, and the natural resistance movement within causes the skin to heat up. Using the principle of dermal collagen cellulose, it shrinks immediately at 45-60 ℃, which can smooth wrinkles, firm skin and delay skin aging.
Diamond Tip Water Microdermabrasion
In this type of treatment, dead skin cells are removed and the face is vacuumed with a vacuum dermabrasion machine that uses a microdermabrasion tip covered with tiny diamonds. This procedure is non-surgical and is known to be most effective for deep acne scars or old stretch marks. In addition, the diamond tip combined with powerful suction allows it to remove skin more thoroughly than other procedures. With flexible use of different suction levels, it also increases blood flow to the skin, which aids in the production of collagen
high frequency
High frequency is to promote the necrosis of epidermal cells through high-frequency electrocoagulation, and instantly and completely eliminate various spots on the face and skin surface, such as age spots, freckles, particles, tattoos, moles, etc., the effect is obvious, no bleeding, no scars.
application:
①Rejuvenate, remove facial blemishes, tighten pores, deeply cleanse, improve skin elasticity and complexion.
② Scar Removal: Remove scars caused by laser treatment, burns, surgery, etc.
③Wrinkle removal: Removes fine lines, wrinkles and spider lines.
④Acne: Remove acne, acne, blackheads and acne scars. Inhibit inflammation.
Hydrodermabrasion with diamond tip
In this type of treatment, dead skin cells are removed and the face is vacuumed with a vacuum dermabrasion machine, which uses a microdermabrasion tip covered with tiny diamonds. This procedure is non-surgical and is known to be most effective for deep acne scars or old stretch marks.
In addition, the diamond tip combined with powerful suction allows it to remove skin more thoroughly than other procedures. It also increases blood flow to the skin thanks to the flexibility to use different suction levels, which aids in collagen production.
1. Apply enough medium (gel, product) to the treatment area.
2. It is generally recommended to select P1 and P2 pulse modes for thick stratum corneum and rough skin, and P0 is suitable for all kinds of normal skin.
3. The intensity can be adjusted according to customer feedback.
4. When operating, the handle is close to the skin, and the customer's cheeks are pushed from the outside to the inside, and the forehead is pushed out from the eyebrows.
5. It is recommended to operate for 5min-10min, and the cleaning cycle is once every two weeks.
The liquefied skin products can be mixed through high-speed valves to form ultra-fine mist, sprayed on the skin and quickly absorbed by the skin.
Application:
1. Improve symptom such as aging and loosening skin, big pore, slender wrinkles.
2. Improve pigmentary pathological changes, such as freckle, sunburn, senile plaques.
3. Improver dark complex ion caused by bad metabolism or poor circulation.
4. Repair and nurse the damaged skin.
5. Do detumescence, inflammation diminishing and scar elimination treatment for oil acne effectively.
Contraindications:
① Fever, infectious disease, acute illness.
② People with heart disease or equipped with a pacemaker.
③Severe hypertension, tumor disease, asthma, deep vein thrombosis, varicose veins, thyroid, cancer, fainting disease patients.
④ Those who suffer from bleeding disorders, trauma, ruptured blood vessels, skin inflammation, skin diseases.
⑤ Pregnant women
⑥ Do not use on the abdomen during menstruation
⑦ Plastic parts for medical use, or parts with metal inside
⑧ Those who have abnormal immune system
Product Service and Maintenance
① Warranty: The warranty date is 2 years from the date of purchasing. We are responsible for the maintenance in our facility in GZ. When the warranty date is expired, we will charge the service fee or the cost of the component.
② Professional Use: The merchandise of our Products is designed for professional use only and must be installed by a licensed professional electrician only. Failure to do so will void customer warranty.
③ Manufacturer Defects: In the event of defects immaterial and workmanship our obligation shall be limited to free labor and parts repair or replacement, solely a tour option, of any defective part for a period of one year from the date of purchase.
④ Disclaimer of Damages: The remedies provided here in are the buyer’s sole and exclusive remedies and in no event shall our products be liable for direct, indirect, special, incidental, or consequential damages (including loss of profits)whether based on contract, tort, or any other legal theory.
⑤ Returns: All damaged machines must return in 30 days after receiving the confirmation from our service department.
⑥ Shipping Policy: For your protection, the acceptance of this shipment by the Transportation Company is an acknowledgement that the articles were delivered to them in good working condition and properly packed.
- Improper damage such as: violent impact, vibration, drop, condensing chamber burning, crystal rod damage, etc.
Improper damage or loss of key components such as mobile phones, protective glasses, power cords, etc. will be charged for accessories.
Consumers improperly repair the machine themselves.
Damage due to irresistible forces such as fires, earthquakes and other natural disasters.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
