Diode Laser Salon Laser Hair Removal Machine 755nm 808nm 1064nm
755-808-1064nm Diode Laser Hair Removal Skin Rejuvenation High Power Non Channel Laser Diode Hair Removal Body And Skin
2022 Newest OEM 755/808/1064nm Laser Hair Removal Machine with three wavelengths
feature
The DL-808 is a device that can convert electricity, light, and heat into continuous high-energy lasers. DL-808 integrates laser technology, electronic technology and computer technology to excel at permanent hair removal.
DL-808 hair removal principle: diode laser hair removal is currently the safest and fastest. However, the primary chromophore for laser hair removal is melanin, which is found in the hair shaft. Second, melanin residing in the inner and outer root sheaths can also act as secondary chromophores. Based on the principle of selective photothermal action, through specific wavelengths, it penetrates the epidermis and enters the dermis layer, absorbs and converts light energy into heat energy, inhibits hair follicle tissue, and produces photothermal effect. It absorbs laser energy in melanin-rich hair follicles and surrounding tissue absorbs less or no energy to suppress the follicle's melanin and remove the hair.
At the same time, the unwanted hair is removed almost painlessly without damaging the surrounding tissues; the ultimate in permanent hair removal.
| Type | Laser hair removal equipment |
| Wavelength | 755nm, 808nm, 1064nm |
| Working frequency | 1~10hz |
| Energy density | 1-120j/cm2 |
| Spot size | 15cm×15cm, 20*25cm, 25 x31mm |
| Output power | 600w/1200w |
| Pulse width | 5ms~400ms |
| voltage | 220V |
Laser hair removal machine has 3 wavelengths 755nm, 808nm and 1064nm. with different laser properties. It can directly penetrate into the hair follicle, and the light and heat are absorbed by melanin, which is decomposed and excreted through metabolism to achieve accurate and effective effects.
At the same time, the contact surface cooling technology adopted by Sapphire Dual-ChillTip can eliminate the thermal effect caused by light energy, which greatly improves the treatment performance and safety.
application:
1. Work on every hair color from black to gray
2. Treats All Skin Types From White to Black
3. Painless and shorter treatment time
4. Effective and safe permanent hair removal treatment
The laser hair removal machine adopts a new technology that combines 3 wavelengths, as follows:
* 755nm laser: used to remove fine hair, effective for light-colored hair, such as lips around the hair, eyebrows, etc.
*808nm Laser: Used for almost most hair removal.
*1064nm Laser: For dark hair, the energy can penetrate deep into the skin, so it is very effective for brown hair and dark skin patients.
Advantages of Laser Hair Removal Machine:
1. Language: choose different
2. Gender: Male or female
3. Different treatment areas: forehead, face, underarm, legs
4. Voice Control During Therapy
5. Recommended Parameters for Each Skin Type and Region
6. Safety: the relationship of energy, pulse width and frequency
808 Hair Removal Theory
The 808 freezing point is based on selective solar thermodynamics. By adjusting the wavelength, energy and pulse width of the laser, it reaches the hair follicle through the skin, absorbs heat energy to decompose the hair follicle tissue, and regenerates hair. The quick-freezing hair removal system adopts cryoprotection, the temperature can reach -5℃, which solves many difficulties. At the same time, safe, fast and permanent technology.
Scope of application
Lips, Armpits, Arms, Legs, Bikini Line, etc
Hair loss period
There are 3 stages of hair removal: growth, regression and telogen. Treatment works best when hair is growing. During the growth phase, the pigment in the hair follicle is completely absorbed. At that time the hair follicles are the weakest and the hair removal effect is best. You will see 2 healing effects. Not only does it remove unwanted hair, it can also be used to change the shape of beards.
| wavelength | 755nm 808nm 1064nm | OEM customized service |
| Working frequency | 1~10hz | Maximum frequency 20 Hz |
| Energy density | 1-120j/cm2 | 1-150j/cm2 optional |
| Handle piece cooling | TEC+sapphire | Sapphire size customizable |
| TEC cooling | 12V 6A | TEC power customizable |
| Spot size | 20mm×15mm or 25 x31mm | Spot size and window of light customizable |
| Output power | 6PCS 900W | Laser power available |
| Laser bars | Germany laser Jenoptik,150W/piece | |
| Pulse width | 5ms~400ms | 0~1000ms customizable |
| Output mode | Pulse output | Pulse output |
| Language | Standard English | customizable |
| display | 8’ color touch screen | 10.4’ optional |
| Protective temperature | 55℃ interface select | customizable |
| Water pump | DP-60 diaphragm rods 12V | imported pump optional |
| Flow sensor | At least 3.5L/min | |
| Water level switch | Test water level | |
| Cooling system | 240×120cooling line(2pc),18 pcs channel | Compressor plan,TEC plan |
| Cooling fan | 4pcs fans,speed 3150r/min | 12v fans |
| Case material | ABS shell/metal shell | customizable metal shell |
| Inter structure | White zinc hob/color zinc hob | customizable |
| Water tank volume | vertical3.6L/table type 2.5L | customizable |
| Environmental moisture | < 80% | < 80% |
| Environment temperature | Air conditioning room,temperature≤35℃ | |
| voltage | 220V | 110Vavailable |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.





