Ferro Silicon 75 Ndispensable Deoxidizer Steel Making Ferro Silicon Suppliers

Ferro Silicon 75 Ndispensable Deoxidizer Steel Making Ferro Silicon Suppliers

1. Ferro silicon is often used as deoxidizer in steel making.
2. Ferro silicon also can be used as alloy elements join agent,which is widely used in low alloy steel,non-ferrous metal,bearing steel,heat-resistant steels and electrician silicon steel.
3. Ferro silicon commonly used as a reductant in ferroalloy production and chemical industry.
4. In iron industry,ferro silicon often used as inoculant and nodulizer and deoxidizer.

Ferro Silicon Application

(1) Ferrosilicon is an indispensable deoxidizer in the steelmaking industry. In steelmaking, ferrosilicon is used for precipitation deoxidation and diffusion deoxidation. Brick iron is also used in steelmaking as an alloying agent.

(2) Used as an inoculant and a nodularizer in the cast iron industry. In the production of ductile iron, 75 ferrosilicon is an important inoculant (helping to precipitate graphite) and nodularizing agent.

(3) Used as a reducing agent in the production of ferroalloys. Not only the chemical affinity between silicon and oxygen is very high, but also the carbon content of high silicon ferrosilicon is very low. Therefore, high-silicon ferrosilicon (or siliceous alloy) is a commonly used reducing agent in the production of low-carbon ferroalloys in the ferroalloy industry.

(4) 75 ferrosilicon is often used in the high-temperature smelting process of metal magnesium in the Pidgeon process of magnesium smelting. The magnesium in CaO.MgO is replaced, and about 1.2 tons of ferrosilicon are consumed for each ton of metal magnesium produced. Magnesium metal production plays a big role

Sipecifications Ferro Silicon

Processing and Packing Process

1. FACTORY

The factory ground is cleaned every day so as to keep the floor clean, garbage and debris are forbidden on site

2. ORIGINAL MATERIAL

3. PROCESSING SITE

Keep clean,not allowed dust or sundries. Workers’ site is kept clean.

The material is knocked by workers hand work and knock into different particle size, particle size has strict requirement, must be within the scope of the requirements, inspection personnel measure with a ruler.

4. EMPTY TON BAGS

5. BAGGING

6. WEIGH

7. SEAL

8. LOADING