8mm 32mm Reinforced Steel Rebar Stainless Steel Rebar For Building Structures

Reinforcement Stainless Steel Rebars (Ferritic)
Grade G Of IS 16651:2017
What Is SS Rebar Grade G?
It is a new kind of stainless steel rebar first introduced in India by Sunflag Steel. SS Rebar Grade G is a low cost stainless containing 11-13.5% Chromium rebar that has a good corrosion resistance. SS REBAR GRADE G is a new age building material which increase the life of the building because of its better corrosion resistance properties compared to TMT, Epoxy coated or Zinc coated rebars.

Why SS Rebar Grade G?
Like any other rebar SS REBAR GRADE G does the job of reinforcement. The concrete inner structure of any building is made of steel . Due to formation of chromium oxide layer on the surface when exposed to atmosphere the SS REBAR GRADE G rebar does not get corroded. This protective oxide layer improves the life of rebar in concrete. In twenty first century SS REBAR GRADE G is a gift to builder, architect and consumer for corrosion free structure.

Corrosion In Concrete Structure
The corrosion of reinforcing bar can result in cost maintenance and repair of concrete structures. Corrosion may occur as a result of carbonation of the concrete, which destroys the protective passive layer surrounding the reinforcing bar. In marine environments, chemical and mineral processing plants etc., corrosion is usually caused by the ingress of highly corrosive chloride ions through the concrete to the reinforcing bar. The products of Corrosion (Iron salts and oxides) of the reinforcing bar occupy a considerably greater volume than the original steel resulting in the cracking and subsequent spalling of the concrete. The corrosive attack on the reinforcement then becomes very rapid as the steel is no longer protected by the concrete cover.