HDPE Electrofusion Weld Reducer Coupling

About HDPE Material

High density polyethylene (HDPE), white powder or granular product. Non-toxic, tasteless, crystallinity of 80% ~ 90%, softening point of 125 ~ 135℃, use temperature up to 100℃; The hardness, tensile strength and creep properties are better than those of LDPE. Good wear resistance, electrical insulation, toughness and cold resistance; Good chemical stability, at room temperature, insoluble in any organic solvent, acid, alkali and various salts corrosion; The membrane has low permeability to water vapor and air and low water absorption. Poor aging resistance, environmental stress cracking resistance is not as good as low density polyethylene, especially thermal oxidation will make its performance decline, so the resin must be added to the antioxidant and ultraviolet absorbent to improve the lack of this aspect. High density polyethylene film has low thermal deformation temperature under stress, so attention should be paid to its application

Product Feature

1.Working Temperature:-20-40°C

2.Long life: Over 50 years

3.Corrosion Resistant: Resist chemical matters or electron chemical corrosion.

4.Lower installation costs: light weight and ease of installation can reduce installation costs

5.High flow capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes

6.Reliable Connection: PE pipes use electro fusion joint or socket fusion joint, the strength of interface stronger than pipe itself and the joint won’t be broken in case of soil moving or live load effect.

7.Light weight PE pipes, simple safe and reliable welding technique, convenient construction and lower cost of the whole engineering.

Basic Information

Model Number:Electrofusion Weld Reducer Coupling

Connection:Welding, Male/Female/Socket/Welding

Brand Name: SENPU

Specification:160*180

Installation:Welding, fusion, socket fusion

Pressure :2.5 / 2.0 / 1.6 / 1.25 / 0.6 MPa

Product Application:Water supply/ Oil supply/Natural gas supply

Application / Models

1.Town tap water supply pipe systems

2.Displace cement tube, Cast-iron pipe, Steel pipe

3.Feeding pipe for industry material

4.Water feeding pipe for garden

5.Drainage pipe

6.Agriculture watering

If you need samples for check ,we can provide the samples for free. Besides, we have a group of professional employees, if you have any problems, please contact us and we will reply you within12 hours. And we will provide you with careful after-sales service to meet your various requirements. Our company has its own advanced independent laboratory and professional testing team.