Hot Pluggable 10G SFP+ Active Optical Cable AOC High Speed
Product Overview
Features
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector receiver
Up to 300m on OM3 MMF
Operating case temperature: 0 to 70℃
All-metal housing for superior EMI performance RoHS compliant (lead free) Applications
10 Gigabit Ethernet
4G and 8G Fibre Channel Applications
1x InfiniBand QDR. DDR, SDR
High-performance computing clusters
Servers, switches, storage and host card adapters
Description
femrice SFP+ Active Optical Cables are direct-attach fiber assemblies with SFP+ connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. femrice SFP+ Active Optical Cables’s length is up to 300 meters on OM3 MMF
Absolute Maximum Ratings Table 1 - Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | 0 | 3.6 | V |
| Storage Temperature | Ts | 40 | +85 | °C |
| Operating Humidity | - | 5 | 85 | % |
SFP+ AOC Specifications
| Module Form Factor | SFP+ (Supports SFF8431/SFF8432/SFF8472) |
| Protocols Supported | InfiniBand, Ethernet, Fiber Channel |
| Channel Data Rate | Rate 1 to 10.3125Gbps |
| BER | <10-12 |
| Operating Case Temperature | e 0 to + 70ºC |
| Storage Temperature | -20 to + 85ºC |
| Supply Voltage | 3.3V |
| Supply current | 230mA per end typical |
| Management Interface Serial | I2C (Supports SFF8472) |
Optical characteristics
The following optical characteristics are defined over the Recommended Operating Environment unless otherwise specified.
| Parameter | Symbol | Min. | Typical | Max | Unit | Notes |
| Transmitter | ||||||
| Center Wavelength | λt | 840 | 850 | 860 | nm | |
| RMS spectral width | Pm | - | - | Note 1 | nm | |
| Average Optical Power | Pavg | -6.5 | - | -1 | dBm | 2 |
| Extinction Ratio | ER | 3.5 | - | - | dB | 3 |
| Transmitter Dispersion Penalty | TDP | 3.9 | dB | |||
| Relative Intensity Noise | ||||||
| Optical Return Loss Tolerance | ||||||
| Receiver | ||||||
| Center Wavelength | λr | 840 | 850 | 860 | nm | |
| Receiver Sensitivity | Psens | - | - | -11.1 | dBm | 4 |
| Stressed Sensitivity in OMA | - | - | -7.5 | dBm | 4 | |
| Los function | Los | -30 | - | -12 | dBm | |
| Overload | Pin | - | - | -1.0 | dBm | dBm 4 |
| Receiver Reflectance | - | - | -12 | dB | ||
Note:
1. Trade-offs are available between spectral width, center wavelength and minimum OMA, as shown in table 6.
2. The optical power is launched into MMF
3. Measured with a PRBS 231-1 test pattern @10.3125Gbps
4. Measured with a PRBS 231 -1 test pattern @10.3125Gbps,BER≤10-12.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.