Single Phase Digital Electronic Energy Meter Watt Hour Meter With Led Display
Single Phase Prepaid Energy Meter with LED
Model YEM091PA single phase electronic prepayment front board installed activeenergymeter is a kind of single phase two wire active energy meter which purchaseselectricity byIC card, electric energy measuring, load control and using electricitymanagement. Themeter completely accords with relevant technical requirements ofclass 1 single phaseactive energy meter stipulated in international standard IEC62053-21. It can accuratelyand directly measure 50Hz or 60Hz active energyconsumption from single phase ACelectricity net, it is used for setting indoor or outdoor meter box. This meter has LEDdisplay shows power. It has following features:good reliability, light weight, specious nice appearance, convenient installation, etc.
- Standard configuration one meter one card, can repeat input money from PC machinery which with IC programmer, may select one-time recharge card. (Please specified when ordering).
- It has IC card with code and data against false, standard configuration use storage IC card, may select non-contact RF card. (Product Configuration code is PI).
- Standard configuration payment by kWh, may select payment by money. (Please specified when ordering).
- Standard configuration of the prepayment management system use of single version, may select network version. (Please specified when ordering).
- It has load control and function of automatic fault detection and instructions, standard configuration without function of open terminals cover and detection, may select open terminals cover and cut power.(Please specified when ordering).
- 6 LED digits display, 5+1 digits display (99999.1kWh), may select 7 LED digits display. (Product Configuration code is QA).
- A port of pulse output passive closed(polarity), complying with standard IEC 62053-31 and standard DIN 43864.
- Two LED instructions signal of energy impulse (red) and direction of the flow of load current (yellow).
- Automatic detection the direction of the flow of load current. When the yellow LED display, that is meaning the direction of the flow of load current reverse.
- Single direction single component measure single phase two wire active energy consumption. It is nothing with direction of the flow of load current. Complying with standard IEC 62053-21.
- Direct connect operation, there are two types wiring you may select. Standard configuration type 1B wiring, may select type 1A wiring (Product Configuration code is PB).
- Front board three fixed installation, standard configuration extension terminals cover, in order to protect to use safety, may select short terminals cover. (Product Configuration code is PC).
| Model | YEM091PA |
| Accuracy | 1.0 |
| Reference voltage(V) | 127V,230V |
| Current specifications(A) | 5(30)A,10(60)A,20(100)A |
| Starting current(A) | 0.02A,0.04A,0.08A |
| Insulation performance |
AC voltage 4KV for 1 mimute, 1.2/50us waveform impulse voltage 6KV |
1Where is your factory?
Our factory is located in Qiaoqian Industry Area, Liushi Town, Yueqing City, Zhejiang Province, 325603 China.
2 Are you manufacturer or business?
We are manufacturer established in 2002, and have over16years production experience.
3. Can I ask for samples?
Yes
4. What´s the warranty of your products?
18months
5. What´s the lead time?
Depend on the quantity and model of the order, normally it takes around2-3days, buttheexact lead time should be discussed with our sales.
6.How about the MOQ, Payment term, Delivery port, and shipping date?
1)MOQ: 100 pcs/item based on existing packing.
2)T/T-30% deposit and 70% against copy of BL
3)L/C is also acceptable
4)Ningbo/Shanghai
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.