Electronic Micropore Leak Detector For Soft Bags​

Application

The machine is dedicated to inspecting soft-bag injection for possible liquid leak. It can inspect pinhole (>0.1μm) on soft-bags, leak on body and welded bag mouth.

Parameters

Inspection Process

The soft bag is conveyed to the accelerating mesh belt by connection or manual feeding. The acceleration mesh belt spreads the distance between the soft bags and then feeds them into the station of the conveyor mesh belt. The conveyor mesh belt is divided into several sections, which are intersected with each other. Each section of the network belt is composed of multiple plastic chains in parallel, and there are gaps between the plastic chains.

The soft bags are conveyed forward by the mesh belt, meanwhile their head mouth tube and the lower surface are to be inspected in turn (due to the surface contacted with the chain, it only can be inspected within the chain gap between the plastic chains every time, so it need to be inspected in two belt interval by inspecting twice, then one side surface leak inspection of the soft bag is finished); and then the bags through the turnover wheel, the other side surface of soft bag that originally located in the above is turned over to be lower surface; then this side surface through twice body inspecting and one top inspecting; the leak inspection of overall bag is finished.

Then, reject the unqualified products by the reject device. When the system has inspected out unqualified products, the reject device rotates upward at a certain angle and the unqualified products fall off. When the reject system inspects that it is a good product, the reject device will return to its position and connect with the conveying mesh belt, then the good products will be transported to the subsequent connecting net belt through the net belt on the reject device;

Finally, the collection work will be done manually or the machine can be connected to the subsequent machine.

Remark:

The technical specifications and configurations in this quotation are the existing technologies, structures and configurations. If there is any improvement or change, the customer will be notified in time; the final technical specifications and configurations are subject to the DQ document.