12.8V 100Ah Lithium EV Battery 1.28kWh High End For Solar System
High-end product 100Ah 12.8V 1.28kWh lithium battery for solar system
This product uses lithium iron phosphate battery, with the advantages of safety, reliability, long service life, strong adaptability, etc.
The main features of the product are as follows:
1.Long battery cycle life, the maximum number of cycles can reach 5000 times;
2.Lithium iron phosphate high stability battery, thermal runaway will not fire;
3.Custom-developed BMS protection board to ensure the safety and reliability of lithium batteries;
4.The product can have a built-in fire extinguishing device for accurate and rapid fire extinguishing;
5.High energy density, saving 70% of the floor area compared with lead-acid.
Batteries
This product uses lithium iron phosphate batteries, and its production process adopts automatic equipment, with good product consistency, high cycle life, and no environmental pollution in the production process.
| Model Number | YH-12-B100 |
| Nominal capacity | 100Ah |
| Nominal Voltage | 12.8V |
| Rated total energy | 1.28kWh |
| Charging maximum voltage | 14.6V |
| Charging method | CC ,CV |
| Charge up to current | 0.02C |
| Charging time | 20-22H |
| Single highest battery | 3.6V |
| Minimum voltage per cell | 2.5V |
| Overcurrent protection | 15A |
| Short circuit protection | Yes |
| Weight | 10Kg |
| Dimensions (L*W*H) | 330x172x215mm |
| Operating temperature | 0C~50C |
| Storage temperature | -10C~45C |
| Cooling method | Natural cooling |
| Capacity | 50Ah / 100Ah |
| Nominal voltage | 3.2V |
| Charge/discharge voltage range | 2.5 ~3.65 |
| Weight | 1100士30g(50Ah) 1900士30g(100Ah) |
| Mass energy density | 145Wh/kg |
| Volumetric energy density | 308Wh/L |
| AC internal resistance | 0.27mΩ <R <0.4 mΩ |
| DC internal resistance | 0.5mΩ <R < 1 mΩ |
| Normal temperature cycling performance | 3000 Cycles>80% |
| High temperature cycling performance | 1200 Cycles>80% |
Storage conditions
If the product is stored for a long time, please charge the battery pack to about 50% of the power, place it in a dry and ventilated place, and charge it with a charger for 3 hours every 3 months (50A charging). The battery pack and charger should be stored in a clean, dry and ventilated place, avoid contact with corrosive substances, and keep away from fire and heat sources.
Precautions for using batteries
1.Do not throw the battery pack into water or get it wet!
2.Do not charge the battery pack in fire or extreme heat! Do not use or store batteries near heat sources such as fire or heaters, and if a battery leaks or emits an odor, remove it from near open flames immediately. When using the battery for the first time, the battery must be fully charged before use!
3.Do not reverse the positive and negative poles! Do not throw the battery pack into fire or heat the battery pack!
4.Do not use wires or other metal objects to short-circuit the positive and negative poles of the battery pack!
5.Do not pierce the battery pack case with nails or other sharp objects, and do not hammer or step on the battery pack!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.