water pump TD central air conditioning pipeline circulating water
Price:
US $ 16.8~30.8/PCS
MOQ:
1/PCS
Delivery Time:
2 word days
Brand:
YUE MI
Product Description
TD Series Mechanical Seals for Centrifugal Pipe Circulating Water Pumps
Product Specifications
Mechanical Seal Details
| Name | Custom Mechanical Seal Type Special for TD Pump |
|---|---|
| Model | TD Pump Use |
| Size | 28, 32, 40 |
| Application | Pump |
| Material | CA/CE/SiC/TC/NBR/EPDM/V/S.S/SUS304/SUS316 |
| Certificate | ISO9001, CQC, SGS, CNAS |
Technical Parameters
| Temperature | -30℃ ~ +200℃ |
|---|---|
| Pressure | ≤ 1.2 MPa |
| Speed | ≤ 10 m/s |
| Medium | Sewage |
Material Composition
| Rotary Ring | SiC/VIT |
|---|---|
| Stationary Ring | SiC/VIT |
| Spring | SUS304/SUS316 |
| Stationary Seat | SUS304/SUS316 |
| Secondary Seal | FKM/EPDM |
| Rotary Ring Holder | SUS304/SUS316 |
Installation Preparation
- Shaft Outside Diameter is within tolerance ±0.05mm
- Shaft run out < 0.1mm
- Shaft end float < 0.13mm
- No sharp edges on the shaft over the O-ring
Important Note: During installation, do not scratch or damage the O-ring. If anything is damaged, please contact us to replace with a new one.
Installation Instructions
The full set of cartridge seal is cleaned and exactly passed leakage examination before sale. To avoid damage, do not disassemble and clean the parts again before fixing.
The fitting allowance between the seal and shaft is dl h6 0.8, and there should be leading-in edge at the end of shaft. The outside diameter of shaft at the position of screw should be 01 0.2mm smaller, resisting the screw over-tighten. Lubricate the shaft with oil.
Place the cartridge seal into the pump chamber, then:
- Tighten four screw bolts of flanges, ensuring the medium leading in hole "G" at the top position
- Tighten four set screws and position the shaft sleeve on the shaft
- Remove four gauge plates. Please keep them as they will be used in future installation and disassembly
- Connect the medium lead-in pipe with hole "G" to flush away the friction heat and flush the seal chamber when pump is running
Final Check: After complete installation, turn the shaft by hand to check for rotation. If the shaft could not rotate smoothly, the seal has been improperly installed.
We would like to sincerely cooperate with clients to supply high quality products and service. We believe in establishing a long-term cooperative relationship is the key to success.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
YUEMI
Location
Huadu District, Guangzhou City, Guangdong Province, China
Contact Person
ZENG