CNP Horizontal Shaft Carbon Mechanical Seal For Water Pump ZS50/65/80/100 ZS-24/BSE4
Price:
US $ 18.8-58.8/PCS
MOQ:
1/PCS
Delivery Time:
2 word days
Brand:
YUE MI
Product Description
CNP Horizontal Shaft Carbon Mechanical Seal
Product Overview
ZS-24/BSE4/BSF4 mechanical seals designed for CNP horizontal single stage centrifugal pumps including models ZS50-32, ZS65-40, and ZS65-50.
Technical Specifications
| Model Size | d | D | D1 | L | L1 |
|---|---|---|---|---|---|
| ZS-24 | 24 | 39 | 39 | 35 | 10 |
| ZS-32 | 32 | 48 | 46.6 | 51 | 9 |
Material Composition
- Face: Silicon Carbide (SiC)
- Seat: Silicon Carbide (SiC)
- O-ring: NBR, EPDM, VIT, Aflas, FEP, Kalrez, Chemraz
- Spring: SS304, SS316
- Metal Parts: SS304, SS316
Installation Preparation
- Shaft Outside Diameter tolerance: ±0.05mm
- Shaft run out: <0.1mm
- Shaft end float: <0.13mm
- No sharp edges on the shaft over the O-ring
Important Note: During installation, avoid scratching or damaging the O-ring. If any component is damaged, contact us immediately for replacement.
Installation Instructions
Step 1: Cartridge seals are pre-cleaned and leak-tested. Do not disassemble before installation.
Step 2: Ensure shaft fitting allowance is dl h6 0.8. Lubricate shaft with oil before installation.
Step 3: Place cartridge seal into pump chamber and proceed with the following:
- Tighten four flange screw bolts, ensuring medium leading hole "G" is at top position
- Tighten four set screws to position shaft sleeve on shaft
- Remove four gauge plates (retain for future use)
- Connect medium lead-in pipe with hole "G" for friction heat dissipation and seal chamber flushing
Final Check: After installation, manually rotate the shaft to verify smooth rotation. If rotation is not smooth, the seal may be improperly installed.
We are committed to establishing long-term cooperative relationships with our clients by providing high-quality products and exceptional service.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
YUEMI
Location
Huadu District, Guangzhou City, Guangdong Province, China
Contact Person
ZENG