Water Pump TD Central Air Conditioning Pipeline Circulating Water
Price:
US $ 16.8~30.8/PCS
MOQ:
1/PCS
Delivery Time:
2 word days
Brand:
YUE MI
Product Description
TD Series Mechanical Seals for Centrifugal Pipe Circulating Water Pumps
Product Specifications
| Product Name | Custom Mechanical Seal Type Special for TD Pump |
|---|---|
| Model | TD Pump Use |
| Available Sizes | 28, 32, 40 |
| Application | Pump |
| Materials | CA/CE/SiC/TC/NBR/EPDM/V/S.S/SUS304/SUS316 |
| Certifications | ISO9001, CQC, SGS, CNAS |
Technical Parameters
| Temperature Range | -30℃ to +200℃ |
|---|---|
| Maximum Pressure | ≤1.2 MPa |
| Maximum Speed | ≤10 m/s |
| Compatible Media | Sewage |
Material Composition
| Component | Materials |
|---|---|
| Rotary Ring | SiC/VIT |
| Stationary Ring | SiC/VIT |
| Spring | SUS304/SUS316 |
| Stationary Seat | SUS304/SUS316 |
| Secondary Seal | FKM/EPDM |
| Rotary Ring Holder | SUS304/SUS316 |
Installation Preparation Requirements
- Shaft outside diameter tolerance: ±0.05mm
- Shaft run out: <0.1mm
- Shaft end float: <0.13mm
- No sharp edges on the shaft over the O-ring area
Important Note: During installation, avoid scratching or damaging the O-ring. If any component is damaged, please contact us for replacement.
Installation Instructions
Our cartridge seals are thoroughly cleaned and leak-tested before sale. To prevent damage, do not disassemble or clean components before installation.
Fitting Specifications:
- Seal-to-shaft fitting allowance: dl h6 0.8
- Leading edge required at shaft end
- Screw position shaft diameter: 01 0.2mm smaller to prevent over-tightening
- Lubricate shaft with appropriate oil
Installation Steps:
- Place cartridge seal into pump chamber
- Tighten four flange screw bolts, ensuring medium leading-in hole "G" is at top position
- Tighten four set screws to position shaft sleeve on shaft
- Remove four gauge plates (retain for future installation/disassembly)
- Connect medium lead-in pipe with hole "G" to flush away friction heat and maintain seal chamber during pump operation
Post-Installation Check: After installation, manually rotate the shaft to verify smooth rotation. If rotation is not smooth, the seal has been improperly installed.
We are committed to establishing long-term cooperative relationships with our clients by providing high-quality products and exceptional service. Our success is built on mutual trust and lasting partnerships.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
YUEMI
Location
Huadu District, Guangzhou City, Guangdong Province, China
Contact Person
ZENG