Reusable TPU Insulated SpO2 Extension Cable with 1.2m and 3m Lengths for Medical Equipment Connection
TPU insulated reusable medical equipment cables designed for reliable medical equipment connections.
- Conductor: Tinned stranded copper or alloy copper
- Insulation: Flexible polyethylene or heat-resistant polyethylene, low noise, conductive plastic
- Shielding rate: At least 85%, woven or wound
- Outer jacket: PVC or polyurethane
These high-quality extension cables ensure interference-free and precise data transmission with enhanced durability. The available lengths provide flexibility for various medical scenarios.
| Length | Application |
|---|---|
| 1.2 m | For rooms with limited space or patients close to the monitor |
| 3 m | Provides greater freedom of movement for larger treatment rooms or mobile patients |
- Compatible with sensors
- Rugged construction suitable for everyday medical use
- Optimal lengths for different clinical applications
- Reliable signal transmission for accurate SpO2 measurement
Ideal for intensive care units, general wards, emergency rooms, and nursing facilities. These SpO2 extension cables help ensure optimal patient care across various medical settings.
- Hospitals
- Nursing facilities
- Intensive Care Medicine
| Brand | LINKE | Cross Section (mm²) | 0.01-500mm² |
| Wire Gauge (AWG) | [e.g., 24AWG, 28AWG] | Conductor | Tinned Copper /bare copper, based on client's requirements |
| Insulation material | PVC/TPU/Silicone rubber/PE/PP/XLPE/Nylon/other | Jacket Material | [PVC/PU/Rubber/Braid/etc.] |
| Certifications | RoHS/REACH/UL/CE/IP68/etc | Custom Length | [e.g., 1m, 3ft, 5m ±5% tolerance] |
| Cable Type | [Medical/Power/Audio/Coaxial/Electrical/Automotive/Energy storage//etc.] | Shielding | [Shielded/Unshielded/Braid Shield] |
| Impedance | [e.g., 75Ω (for coaxial cables)] | Printing/Logo | [Text/Label/Logo, max. 20 characters] |
| Bend Radius | [e.g., ≥5× cable diameter] | Current Rating | [e.g., 5A] |
| Voltage Rating | [e.g., 30V AC/DC] | Connector Material | [Gold-plated/Nickel-plated/Brass/etc.] |
| Connectors | [e.g., USB Type-C, 3.5mm Jack, RJ45] | Jacket | XLPE or PE or PVC RUBBER |
| Delivery Time | 7-14 days after confirming the order | Colors | [Black/White/Red/Custom Pantone/etc.] |
| temperature | Minus-70℃to 350℃(-70℃ ~ 350℃) | Package | Roll/box/plate/Custom |
| Supporting Services | custom cable, end to end solutions, including precise cutting, crimping and installation of lugs (specify material,e.g.,copper/nickel plated) | ||
Independent Laboratory • Complete Testing Equipment • Full Quality Control
We test every product by strict standards to ensure superior quality and reliable performance.
| No. | Test Item | Test Condition | Test Requirement | Test Data | Result |
|---|---|---|---|---|---|
| 1 | Structure Inspection | 1. Comply with wire size table2. Minimum thickness ≥ 80% of average thickness | Comply with wire size table | Refer to test record | Pass |
| 2 | Thermal Shock | Wind the sample on an iron rod of specified size, place in an aging oven at specified temperature for 1 hour, cool the sample to room temperature for at least 30 minutes, then observe the sample | No cracks on the sample surface | No cracks | Pass |
| 3 | Heat Deformation | 1. Measure sample thickness (mark measurement position)2. Place sample and test fixture in aging oven for preheating at specified temperature for 1 hour3. Place sample under pressure column of test fixture for 1 hour4. Re-measure sample thickness at the same position | 1. Sample shall not be cracked by pressure column or expose conductor2. Thickness reduction ≤ 50% | Refer to test record | Pass |
| 4 | FT2 | Apply a standard flame at a height of 125mm once | 1. Flame shall not propagate along its length2. Flame shall not spread to nearby flammable materials | Refer to test record | Pass |
| 5 | Aging | 1. Take five sections of 200mm-long sheath2. Place specimens in aging oven at 158℃ for 168 hours3. After taking out specimens, place at room temperature 23±5℃ for 16 hours, then test elongation at break and tensile strength | 1. Elongation before aging ≥ 300%, elongation after aging ≥ 80% of that before aging2. Tensile strength before aging > 1.41kg/mm², tensile strength after aging ≥ 80% of that before aging | Refer to test record | Pass |
| 6 | Cold Bend | Store sample in low-temperature box at specified temperature for 4 hours, wind sample on iron rod of specified size with specified turns, complete winding within 30 seconds after sample is taken out of low-temperature box | No cracks on the sample surface | No cracks | Pass |
| 7 | Conductor Resistance | Measure resistance of one-meter core conductor with DC resistance meter | At 20℃, resistance of 8AWG ≤ 2.23Ω/km | Refer to test record | Pass |
Linke cable technology (DongGuan) Co. Ltd. concentrate on R&D and
provide professional solutions to the Cable&Wire,especially for the
different industry customers.It contains :
Humanoid robot cable,
AI power cable/data cable,
Semiconductor cable/industrial automatic cable,
Sensor cable,
New energy cable,
Medical beauty wire,
UL wire cable,
Linke Cable has diversified product development capabilities and technical capabilities to support diversified
customer needs. We have obtained the following product authorization:UL 758,CCC,RoHs,REACH,CE; We
have obtained the following quality management system:ISO 9001-2015(All products); ISO 13485
(Medical apparatus and instruments),IATF 16949(Auto industry)
SpO2 sensors provide continuous, non-invasive measurement of arterial oxygen saturation. These durable sensors come in sizes to fit patients from neonates to adults. Linke Sensors are designed and manufactured with state-of-the-art technology, providing better accuracy and patient comfort.
We are a professional manufacturer. We manage your order from beginning to end. Welcome to visit us - we'll provide transportation from Shenzhen.
Samples are free for new clients, who are expected to pay for courier costs.
Normally 100m. However, due to the cable's weight, we recommend ordering suitable quantities to avoid high freight costs. Sea transportation is the most economical option.
Discounts depend on order quantity. We can offer price reductions and cover freight costs. Please contact us for details.
Yes, we can print your company name and even customize quality cards to promote your brand.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.