HPAS High-Pressure Single-Seat Angle Valve

Price Negotiable

Price: Based on oroiect reauirements

MOQ: Negotiable

Delivery Time: 7 - 15 days for small orders, 15 - 30 days for large orders

Brand: WEYO

Product Description

HPAS high-pressure single-seat angle valve is a top-guided control valve, featuring small pressure drop loss in the valve body, large flow rate and wide adjustable range. The angle valve can be selected according to the requirements of pipeline turning layout.

The valve core has a large guiding area and good vibration resistance. The control valve is equipped with a multi-spring diaphragm actuator, which has a compact structure and large output force. The angle valve can be widely used to control high-pressure fluids at various temperatures.

Cv value and stroke are shown in Table 1.
Nominal diameter (mm)			25									40			50			80
Valve seat diameter (mm)												25	32	40	32	40	50	50	65	80
Rated Cv value	Equal percentage linearity	JIS63K ANSI9001500	0.25	0.4	0.63	1	1.6	2.5	4	6.3	12	12	17	25	17	25	47	47	75	110
		ANSI2500										-	12	17	12	17	31	31	47	75
Rated stroke (mm)			14.3			25												38

Allowable pressure difference

I. Valves equipped with HA and VA actuators (with positioners) are shown in Tables 2 and 3.

A. Air-closed valves (Table 2)
Nominal pressure	Actuator	Supply pressure (MPa)	Spring range (MPa)	Allowable pressure difference
				Valve seat diameter (mm) or Cv value
				Cv≤4.0	Cv=6.3	Cv=12	32	40	50	65	80
ANSI 900 1500 JIS 63K	HA3D	0.28	0.04~0.20	16.3 15.2	16.1 14.9	10.2 9.2	5 4.2	3.2 2.7	1.8 1.4	1 0.70	0.70 0.40
		0.3		20.7 19.6	20.5 19.2	13 12	6.4 5.7	4.2 3.6	2.4 1.9	1.4 1	0.90 0.60
		0.35		26.4	26.4	20 19	10 9.2	6.6 6	3.8 3.4	2.3 1.9	1.6 1.3
		0.4		-	-	26.4 26	13.5 12.8	9.1 8.5	5.3 4.8	3.2 2.8	2.2 1.9
	HA4D	0.28		-	-	18.3 17.3	9.1 8.4	6.1 5.5	3.5 3	2.1 1.7	1.4 1.1
		0.3		-	-	23.1 22.1	11.6 10.9	7.7 7.1	4.5 4	2.7 2.3	1.9 1.6
		0.35		-	-	26.4	17.7 17	11.9 11.3	7 6.5	4.2 3.9	3 2.7
		0.4		-	-	-	23.9 23.2	16.1 15.5	9.5 9	5.8 5.4	4.1 3.8
	VA5D	0.26	0.02~0.10	-	-	-	26.3 25.5	17.7 17.1	10.4 10	6.3 6	4.5 4.2
	VA5D	0.28	0.02~0.10	-	-	-	26.4	20 19.4	11.8 11.4	7.2 6.8	5.1 4.8
ANSI 2500	HA3D	0.28	0.04~0.20	16.3 15.2	16.1 14.9	10.2 9.2	10.2 9.2	5 4.2	2.5 2	1.8 1.4	1 0.70
		0.3		20.7 19.6	20.5 19.2	13 12	13 12	6.4 5.7	3.3 2.8	2.4 1.9	1.4 1
		0.35		31.6 30.5	31.4 30.1	20 19	20 19	10 9.2	5.2 4.7	3.8 3.4	2.3 1.9
		0.4		42.5 41.4	42.3 41	27 26	27 26	13.5 12.8	7.2 6.7	5.3 4.8	3.2 2.8
	HA4D	0.28		-	-	18.3 17.3	18.3 17.3	9.1 8.4	4.8 4.3	3.5 3	2.1 1.7
		0.3		-	-	23.1 22.1	23.1 22.1	11.6 10.9	6.1 5.6	4.5 4	2.7 2.3
		0.35		-	-	35.1 34.1	35.1 34.1	17.7 17	9.5 8.9	7 6.5	4.2 3.9
		0.4		-	-	44	44	23.9 23.2	12.8 12.3	9.5 9	5.8 5.4
	VA5D	0.26	0.02~0.10	-	-	-	-	26.3 25.5	14.1 13.6	10.4 10	6.3 6
	VA5D	0.28	0.02~0.10	-	-	-	-	29.6 28.9	15.9 15.4	11.8 11.4	7.2 6.8
Remarks: The maximum allowable pressure difference shall not exceed the maximum value specified in the ANSI B16.34 standard. The maximum allowable pressure difference varies with the valve seat leakage. The pressure difference given in the upper part of the same cell indicates the condition when the valve seat leakage is ≤0.01%, while the pressure difference in the lower part indicates the condition when the valve seat leakage is ≤0.001%. The inlet pressure P1 shall not exceed the maximum allowable pressure difference when the valve is closed.

B. Air-to-open valves Table 3
Nominal pressure	Actuator	Supply pressure (MPa)	Spring range (MPa)	Allowable pressure difference (MPa)
				Valve seat diameter (mm) or Cv value
				Cv≤4.0	Cv=6.3	Cv=12	32	40	50	65	80
ANSI 900 1500	HA3R	0.26~0.04 (*4)	0.08~0.24	16.3 15.2	16.1 14.9	10.2 9.2	5 4.2	3.2 2.7	1.8 1.4	1 0.70	0.70 0.40
	HA4R			18.7 18	18.5 17.7	18.3 17.3	9.1 8.4	6.1 5.5	3.5 3	2.1 1.7	1.4 1.1
	VA5R			-	-	-	12.7 12	8.5 7.9	5 4.5	3 2.6	2.1 1.8
	VA6R	0.30(*1)	0.19~0.25	26.4	26.4	26.4	25.8	17.4	10.2	6.2	4.4
		0.35(*2)	0.19~0.30	26.4	26.4	26.4	25.8	17.4	10.2	6.2	4.4
		0.40(*3)	0.19~0.35	26.4	26.4	26.4	25.1	16.8	9.8	5.9	4.1
ANSI 2500	HA3R	0.26~0.40 (*4)	0.08~0.24	16.3 15.2	16.1 14.9	10.2 9.2	10.2 9.2	5 4.2	2.5 2	1.8 1.4	1 0.70
	HA4R	0.26~0.40 (*4)		18.7 18	18.5 17.7	18.3 17.3	18.3 17.3	9.1 8.4	4.8 4.3	3.5 3	2.1 1.7
	VA5R	0.26~0.28 (*4)		-	-	-	-	12.7 12	6.8 6.2	5 4.5	3 2.6
	VA6R	0.30(*1)	0.19~0.25	32.9	32.8	32.7	32.7	25.8	13.8	10.2	6.2
		0.35(*2)	0.19~0.30	32.9	32.8	32.7	32.7	25.8	13.8	10.2	6.2
		0.40(*3)	0.19~0.35	32.5	32.3	32	32	25.1	13.3	7.8	5.9

II. Valves equipped with VP actuators (with positioners) are shown in Tables 4
公称压力	执行机构	供气压力 (MPa)	允许压差(MP)
			阀座直径(mm)或Cv值
			Cv≤4.0	Cv=6.3	Cv=12	32	40	50	65	80
ANSI 900 1500	VP5	0.3	18.8 18.5	18.7 18.4	18.6 18.2	18.4 17.7	14.2 13.6	8.3 7.9	5 4.7	3.6 3.3
		0.4	25.1 24.8	25.1 24.7	25 24.5	24.7 24.1	19.1 18.5	11.3 10.8	6.9 6.5	4.9 4.6
		0.5	26.4	26.4	26.4	26.4	24 23.4	14.2 13.8	8.7 8.3	6.2 5.9
	VP6	0.3	-	-	-	-	17.9 17.5	14.6 14.2	8.9 8.6	6.4 6.1
		0.4	-	-	-	-	24 23.6	19.7 19.2	12.1 11.7	8.6 8.3
		0.5	-	-	-	-	26.4	24.8 24.3	15.2 14.8	10.9 10.6
	VP7	0.3	-	-	-	-	-	17.5 17.1	13.8 13.5	9.9 9.6
		0.4	-	-	-	-	-	23.4 23.1	18.6 18.2	13.3 13
		0.5	-	-	-	-	-	26.4	23.3 22.9	16.7 16.4
ANSI 2500	VP5	0.3	18.8 18.5	18.7 18.4	18.6 18.2	18.6 18.2	18.4 17.7	11.3 10.7	8.3 7.9	5 4.7
		0.4	25.1 24.8	25.1 24.7	25 24.5	25 24.5	24.7 24.1	15.2 14.7	11.3 10.8	6.9 6.5
		0.5	31.5 32.2	31.4 31.1	31.3 30.9	31.3 30.9	31 30.4	19.2 18.6	14.2 13.8	8.7 8.3
	VP6	0.3	-	-	-	-	-	17.8 17.3	14.6 14.2	8.9 8.6
		0.4	-	-	-	-	-	23.9 23.5	19.7 19.2	12.1 11.7
		0.5	-	-	-	-	-	30 29.6	24.8 24.3	15.2 14.8
	VP7	0.3	-	-	-	-	-	-	17.5 17.1	13.8 13.5
		0.4	-	-	-	-	-	-	23.4 23.1	18.6 18.2
		0.5	-	-	-	-	-	-	29.4 29	23.3 22.9
Remarks: If the actuator is equipped with an auxiliary air supply, the smaller one of the two supply pressures shall be selected as the basis for calculating the allowable pressure difference. The maximum allowable pressure difference shall not exceed the maximum value specified in the ANSI B16.34 or JIS B2201 standard. The inlet pressure P1 shall not exceed the allowable pressure difference when the valve is closed. The maximum allowable pressure difference varies with the valve seat leakage. The pressure difference given in the upper part of the same cell indicates the condition when the valve seat leakage is ≤0.01%, while the pressure difference in the lower part indicates the condition when the valve seat leakage is ≤0.001%.

Flange distance is shown in Table 5. Table 5 Unit: mm
Nominal diameter	A
	JIS63KRF	ANSI900		ANSI1500		ANSI2500
	JIS63KRF	RF,SW,BW	RJ	RF,SW,BW	RJ	RF,SW,BW	RJ
25	138	146				159	159
40	161.5	166.5				179	180.5
50	177	187.5	189	188	189	225	225
80	215.5	220	220	230	230	270	270

Equipped with HA,VA5,VA6,VP actuator

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company WEYO AUTO TECH

Location Room Milton103, Building 5 - 2, Lane 658, Jinzhong Road, Changning District, Shanghai.

Contact Person flnn

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

HPAS High-Pressure Single-Seat Angle Valve

Electronic Miniature Sleeve Control Valve Hydraulic Valve 4-20mA 2-10V DC

HTC Boiler Feed Pump Minimum Flow Control Valve 50mm 65mm 80mm 100mm Nominal Diameter

0.14MPa 0.012-0.35MPa 0.012-0.7MPa Air Compressor Filter Regulator Prv Valve

Double Cylinder Pneumatic Wedge Gate Valves For Petroleum Chemical Industry

4-20mA DCLV Electric V Type Control Ball Valve Novel Structure Light Weight

Three Merging Control Valve 3 Way Diverting Control Valve 1'' 1.5'' 2'' 2.5'' 3'' 4''

HPC High Pressure Cage Regulation Valve 40-200mm Nominal Diameter

Cast Through Parallel Gate Valve DN40 50 65 80 100 125 200 250 300

Three Way Micro Flow Single Seated Control Valve ANSI 150 300 600LB PN16 PN40

T50 Filter Type Pressure Regulating Valves Anti Corrosion

ZSSV V Type Control Pneumatic Ball Valves , Pneumatic Operated Ball Valve

HTS Single Seat Control Valve 40-200mm Nominal Diameter High Precision

Get in Touch

Request A Quote