BSD78560

Additive packaging for worm oil

These products are made from various additives, such as high-quality anti-friction and

Highly effective antioxidants. Worm wheel oil made from this composite has

It has excellent resistance to extreme stress, wear, oxidation and rust.

Recommended dose (% by weight)

BSD - 78560 Worm oil mixture with appropriate amount of emulsifier

Base oil of different viscosity, mixed evenly at 60 - 75 °C, then added 1.5%

Composite agent, L-CKE snail oil can be made: add 2.0% composite agent

It is possible to make worm oil L - CKE / P.

Typical inspection

Standard Project Scope Test Methodology

Appearance light yellow transparent liquid

Density, 20°C kg/m3 1100.0-1100.0 GB/T1884

Sports viscosity, 40°C mm2/s 30 GB/T265

Flash Temperature (Open), °C ≥102 GB/T267

Sulfur content,%(m)≥21 SH/T0303

Phosphorus content,%(m)≥0.85 SH/T0296

PS: 3.8% BSD78662+96.2% Base Oil (40% 150BS+60% 500N)

Product Appearance

Packaging and Storage

200L Metal barrels packed, stored in dry, clean, ventilated warehouse, storage temperature

Duration does not exceed 45°C. This product is not flammable, explosive, not corrosive.

It is comparable to conventional petroleum products in terms of safety, environmental protection and use.

When using, avoid contact with strong oxidant. When in contact with skin, wash with soap.

Product storage, transportation, and compounding agent blending operations and precautions
The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be

clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other

petroleum products;
When adjusting oil, the maximum temperature should not exceed 75 ℃;
Long term storage temperature should not exceed 50 ℃.
Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using,

pay attention to sealed storage.

Health and Safety
The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general

petroleum products in terms of safety, environmental protection, and use.
Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away

from children.
Wear protective gloves when using, and the operator does not need to take special safety precautions. Once

it splashes into the eyes or skin, rinse thoroughly with plenty of water.
Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling

and disposal, and are prohibited from being discharged into water bodies or soil.
For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).