BSD-68610 High-performance SP Grade Gasoline Engine Oil  Additive Package

Product Introduction

This product is made by compounding high-quality magnesium salt, calcium salt cleaner, boride ash free dispersant, antioxidant and anti-corrosion agent, and high-temperature antioxidant. In an appropriate base oil and viscosity index improver formula system, it can meet the performance requirements of SP grade gasoline engine oil and cover most viscosity grades. Has good engine cleaning ability, anti-oxidation, anti-wear properties, and inhibition of low-speed early combustion. The modulated oil is suitable for various mid to high end car engines.

Scope of application

It is formulated with API Group II, III and IV base oils and blended with viscosity index improvers, pour point depressants and anti-foaming agent.

Quality Indicators

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).