Euro Chinese VI Standards High Performance Engine Oil Compound Additive(BSD-68612 )
BSD-68612 Euro and Chinese VI Standards High-performance Engine Oil Compound Additive
Product Performance
This product is refined and blended with calcium-magnesium detergents, borated ashless dispersants, antioxidant and antiwear agents, high-efficiency friction modifiers, etc. It is a kind of high-performance automotive engine oil compound additive. This product can effectively suppress the frequency of low-speed pre-ignition. It can meet the requirements of turbocharger protection, resistance to timing wear and antioxidation performance. It complies with the latest Euro VI and Chinese VI emission requirements.
Scope of Application and Recommended Dosage
It can be formulated into API SP,ACEA C2/C3/C5/C6,GF-6A grade gasoline engine oils with API Group II, III, IV and V base oils.
|
Quality Grade |
Viscosity Grade |
Dosage (m/m %) |
|
API SP |
0W-20, 5W-20, 5W-30 |
9.0% |
|
ACEA C2/C3/C5/C6 |
5W-40, 10W-30, 10W-40, 15W-40 |
10.5% |
|
GF-6A |
5W-40, 10W-30, 10W-40, 15W-40 |
11.5% |
Technical Parameter
|
Item |
Quality Index |
Test Method |
|
Kinematic Viscosity(100℃), mm2/s |
Measured Value |
GB/T265 |
|
Flash Point (Open Cup), ℃ |
≥180 |
GB/T3536 |
|
Total Base Number, mg KOH/g |
60~75 |
SH/T0251 |
|
Sulfated Ash, m/m % |
Reported Value |
GB/T2433 |
|
Calcium Content, m/m % |
0.7~1.0 |
SH/T0270 |
|
Zinc Content, m/m % |
0.60~0.75 |
SH/T0226 |
|
Phosphorus Content, m/m % |
0.60~0.70 |
SH/T0296 |
|
Sulfur Content, m/m % |
1.80~2.30 |
SH/T0303 |
|
Magnesium Content, m/m % |
0.40~0.56 |
ASTM D5185 |
|
Boron Content, m/m % |
0.09~0.13 |
ASTM D5185 |
|
Molybdenum Content, m/m % |
0.07~0.11 |
ASTM D5185 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.